Iseki TA295
The Iseki TA295 is a tractor produced by Iseki. It is equipped with a 91.3 ci 1.5 L engine. The listed engine power is Diesel (listed): 28.6 hp / 21.3 kW. Transmission: 16 forward and reverse. Operating weight: 3428 lbs 1554 kg.
Engine Power
Diesel (listed): 28.6 hp / 21.3 kW
Fuel & Capacities
11.1 gal
42.0 L
Transmission
16 forward and reverse
Operating Weight
3428 lbs
1554 kg
Overview
![]() | 1987 - 1990
Landleader TA5 SeriesCompact Utility tractor
Landleader TA5 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TA295F | 4WD |
Iseki TA295 Engine | |
|---|---|
Isuzu 1.5L 4-cyl diesel | |
Fuel tank | 11.1 gal
42.0 L |
Engine details ... | |
Iseki TA295 Transmission | |
|---|---|
16-speed shuttle | |
Transmission details ... |
Iseki TA295 Power | |
|---|---|
Engine | 28.6 hp
21.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Open operator station. Cab optional. |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 564@2800 |
705@2800 | |
837@2800 | |
1308@2800 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 72.8 inches
184 cm |
Weight | 3428 lbs
1554 kg |
Front tire | 8-16 |
Rear tire | 12.4-26 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Landleader TA295/TA325 published in 1990, by Iseki | |
Operator's Manual Landleader (1564-912-006-1B) published in 1990 |
Engine
Engine Detail — 91.3 ci / 1.5 L Diesel
Manufacturer | Isuzu 4JF1 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 91.3 ci
1.5 L |
Bore/Stroke | 2.96x3.31 inches
75 x 84 mm |
Power | 28.6 hp
21.3 kW |
Rated RPM | 2800 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse shuttle
Type | shuttle |
Gears | 16 forward and reverse |
Four gears in four ranges with left-hand shuttle. Option power shuttle (S variant). | |
![]() | |
Dimensions
Iseki TA295 Tires | |
|---|---|
Standard tires (ag) | Front: 8-16. Rear: 12.4-26 |
Dimensions | |
|---|---|
Wheelbase | 72.8 inches
184 cm |
Length | 128 inches
325 cm |
Width | 59.1 inches
150 cm |
Height | 74.8 inches
189 cm |
Weight | 3428 lbs
1554 kg |
Ground clearance | 12.4 inches
31 cm |
Front tread | 47.6 inches
120 cm |
Rear tread | 44.9/46.5/49.6/51.2/54.3/59.1 inches
114/118/125/130/137/150 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA295 based on its 28.6 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA295.
Estimated Continuous Field Runtime: 7.5 hrs
Approximately 7.5 hours of continuous field operation at ~75% rated power on a full tank (11.1 gal / 42 L).
Estimated 75% Load Fuel Burn~1.5 gal/hr (5.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA295 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA295.
Converted Equivalents:
Horsepower (HP)28.6 hp
Kilowatts (kW)21.3 kW
Metric Horsepower (PS / CV)29 PS
Direct Competitor Comparison
Compare Iseki TA295 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA295
Engine Power:Diesel (listed): 28.6 hp / 21.3 kW
★ Baseline Reference
Related models
Iseki TA230
- Power:
- 23
- Production years:
- 1985 - 1987
Iseki TA235
- Power:
- 23
- Production years:
- 1987 - 1990
Iseki TL2300
- Power:
- 23
- Production years:
- 1980 - 1985
Iseki RTS23
- Power:
- 23.2
- Production years:
- 2016 - 2023
Iseki RTS235
- Power:
- 23.2
- Production years:
- 2023 - 2026



