Iseki TA530
The Iseki TA530 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 30 hp / 22.4 kW. Transmission: 6 forward and 2 reverse. Operating weight: 2,557 lbs 1159 kg.
Engine Power
Diesel (listed): 30 hp / 22.4 kW
Fuel & Capacities
7.9 gal
29.9 L
Transmission
6 forward and 2 reverse
Operating Weight
2,557 lbs
1159 kg
Overview
![]() | 1993 - 1999
TA500 SeriesCompact Utility tractor
TA500 Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Built in Japan | |
Iseki TA530 Engine | |
|---|---|
Iseki 1.5L 3-cyl diesel | |
Fuel tank | 7.9 gal
29.9 L |
Engine details ... | |
Iseki TA530 Transmission | |
|---|---|
6-speed | |
Transmission details ... |
Iseki TA530 Power | |
|---|---|
Engine | 30 hp
22.4 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Mechanical wet disc brakes | |
Two-post folding ROPS. |
Hydraulics | |
|---|---|
Pressure | 2100 psi
144.8 bar |
Total flow | 6.3 gpm
23.8 lpm |
Steering flow | 3.7 gpm
14.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Rear lift (at ends) | 2866 lbs
1300 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic |
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 66.9 inches
169 cm |
Weight | 2,557 lbs
1159 kg |
Front tire | 7x16 |
Rear tire | 12.4x24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
Battery volts | 12 |
Battery AH | 80 |
References | |
|---|---|
![]() | |
TA Series published in 1993, by Iseki |
Engine
Engine Detail — 91.4 ci / 1.5 L Diesel
Manufacturer | Iseki E3AD1 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 91.4 ci
1.5 L |
Bore/Stroke | 3.386x3.386 inches
86 x 86 mm |
Power | 30 hp
22.4 kW |
Rated RPM | 2600 |
Torque | 73 lb-ft
99.0 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 4.5 qts
4.3 L |
Exhaust valve clearance | 0.018 inches
0.457 mm |
Transmission
Transmission — 6 forward and 2 reverse
Gears | 6 forward and 2 reverse |
Oil capacity | 26.4 qts
25.0 L |
Dimensions
Iseki TA530 Tires | |
|---|---|
Ag front | 7x16 |
Ag rear | 12.4x24 |
Dimensions | |
|---|---|
Wheelbase | 66.9 inches
169 cm |
Length | 120.5 inches
306 cm |
Width | 53.4 inches
135 cm |
Height | 58.9 inches
149 cm |
Weight | 2,557 lbs
1159 kg |
Ground clearance | 14 inches
35 cm |
Front tread | 42.1 inches
106 cm |
Rear tread | 40.2 to 52.8 inches
102 to 134 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TA530 based on its 30 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm) | Medium Duty | Standard utility farm tillage. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TA530.
Estimated Continuous Field Runtime: 5.1 hrs
Approximately 5.1 hours of continuous field operation at ~75% rated power on a full tank (7.9 gal / 29.9 L).
Estimated 75% Load Fuel Burn~1.6 gal/hr (5.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TA530 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TA530.
Converted Equivalents:
Horsepower (HP)30 hp
Kilowatts (kW)22.4 kW
Metric Horsepower (PS / CV)30.4 PS
Direct Competitor Comparison
Compare Iseki TA530 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TA530
Engine Power:Diesel (listed): 30 hp / 22.4 kW
★ Baseline Reference
Related models
Iseki TS2400
- Power:
- 24
Iseki TS2420
- Power:
- 24
- Production years:
- 1979 - 1983
Iseki TU324
- Power:
- 24
Iseki TF325
- Power:
- 24.2
- Production years:
- 1996 - 2006
Iseki AT25
- Power:
- 24.7
- Production years:
- 2004 - 2009


