Iseki TE3210
The Iseki TE3210 is a tractor produced by Iseki. It is equipped with a 71.4 ci 1.2 L engine. The listed engine power is Diesel (listed): 21 hp / 15.7 kW. Transmission: 12 forward and 4 reverse. Operating weight: 1587 to 1676 pounds.
Engine Power
Diesel (listed): 21 hp / 15.7 kW
Fuel & Capacities
5.2 gal
19.7 L
Transmission
12 forward and 4 reverse
Operating Weight
1587 to 1676 pounds
Overview
![]() | 1985 - 1991
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Original price was GBP6865 in 1988 | |
Iseki TE3210 Engine | |
|---|---|
Iseki 1.2L 3-cyl diesel | |
Fuel tank | 5.2 gal
19.7 L |
Engine details ... | |
Iseki TE3210 Transmission | |
|---|---|
12-speed | |
Transmission details ... |
Iseki TE3210 Power | |
|---|---|
Engine | 21 hp
15.7 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | manual ball and screw |
Mechanical dry shoe brakes | |
Open operator station. | |
Hydraulics | |
|---|---|
Pressure | 2000 psi
137.9 bar |
Total flow | 4.2 gpm
15.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | 0 |
Rear lift (at ends) | 1,587 lbs
719 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Weight | 1587 to 1676 pounds |
Front tire | 4.00-12 |
2WD Rear tire | 8.3-24 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Charging system | alternator |
Charging amps | 40 |
Battery volts | 12 |
Battery AH | 45 |
References | |
|---|---|
![]() | |
Technical Annual published in 1988, by Power Farming |
Engine
Engine Detail — 71.4 ci / 1.2 L Diesel
Manufacturer | Iseki E3AF1 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 71.4 ci
1.2 L |
Bore/Stroke | 2.992x3.386 inches
76 x 86 mm |
Power | 21 hp
15.7 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 3.2 qts
3.0 L |
Intake valve clearance | 0.018 inches
0.457 mm |
Exhaust valve clearance | 0.018 inches
0.457 mm |
Transmission
Transmission — 12 forward and 4 reverse
Gears | 12 forward and 4 reverse |
Oil capacity | 18 qts
17.0 L |
Dimensions
Iseki TE3210 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-12. Rear: 8.3-24 |
4WD Standard tires (ag) | Front: 6.00-12. Rear: 8.3-24 |
Dimensions | |
|---|---|
Length | 105.5 inches
267 cm |
Width | 42.9 inches
108 cm |
Height | 75.2 inches
191 cm |
2WD Weight | 1587 lbs
719 kg |
4WD Weight | 1676 lbs
760 kg |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TE3210 based on its 21 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TE3210.
Estimated Continuous Field Runtime: 4.8 hrs
Approximately 4.8 hours of continuous field operation at ~75% rated power on a full tank (5.2 gal / 19.7 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.1 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TE3210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TE3210.
Converted Equivalents:
Horsepower (HP)21 hp
Kilowatts (kW)15.7 kW
Metric Horsepower (PS / CV)21.3 PS
Direct Competitor Comparison
Compare Iseki TE3210 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TE3210
Engine Power:Diesel (listed): 21 hp / 15.7 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester D-219
Engine Power:19
Production Years:1962 - 1966
Related models
Iseki TF317
- Power:
- 16.8
- Production years:
- 1996 - 2006
Iseki TU170
- Power:
- 16.8
- Production years:
- 1984 - 1986
Iseki TU1700
- Power:
- 16.8
- Production years:
- 1981 - 1984
Iseki TU1701
- Power:
- 16.8
- Production years:
- 1984 - 1994
Iseki TM170
- Power:
- 17
- Production years:
- 2002 - 2005


