Iseki TM3240
The Iseki TM3240 is a tractor produced by Iseki. It is equipped with a 68.5 ci 1.1 L engine. The listed engine power is Diesel (listed): 21.7 hp / 16.2 kW. Transmission: hydrostatic. Operating weight: 1521 to 1565 pounds.
Engine Power
Diesel (listed): 21.7 hp / 16.2 kW
Fuel & Capacities
6.6 gal
25.0 L
Transmission
hydrostatic
Operating Weight
1521 to 1565 pounds
Overview
![]() | 2004 - 2010
TM SeriesSub-Compact Utility tractor
TM Series
Sub-Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Sub-Compact Utility tractor | |
Iseki TM3240 Engine | |
|---|---|
Iseki 1.1L 3-cyl diesel | |
Fuel tank | 6.6 gal
25.0 L |
Engine details ... | |
Iseki TM3240 Transmission | |
|---|---|
6-speed | |
Transmission details ... |
Iseki TM3240 Power | |
|---|---|
Engine | 21.7 hp
16.2 kW |
PTO (claimed) | 18.5 hp
13.8 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | standard |
Steering | hydrostatic power |
Mechanical wet disc brakes | |
ROPS | |
Hydraulics | |
|---|---|
Pressure | 1993 psi
137.4 bar |
Total flow | 5.4 gpm
20.4 lpm |
Steering flow | 2.6 gpm
9.8 lpm |
Steering press. | 1494 psi
103.0 bar |
Tractor hitch | |
|---|---|
Rear Type | 1 |
Rear lift (at ends) | 1,190 lbs
539 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 567 (gear) |
587 (hydro) | |
Mid PTO Type | 2000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 59.8 inches
151 cm |
Weight | 1521 to 1565 pounds |
Front tire | 5.00-12 |
Rear tire | 9.5-16 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 40 |
Battery CCA | 435 |
Battery volts | 12 |
Engine
Engine Detail — 68.5 ci / 1.1 L Diesel
Manufacturer | Iseki E3112 |
Fuel Type | Diesel |
Configuration | 3-cylinder, liquid-cooled |
Displacement | 68.5 ci
1.1 L |
Bore/Stroke | 3.08x3.07 inches
78 x 78 mm |
Power | 21.7 hp
16.2 kW |
Air cleaner | dry element |
Compression | 22.5:1 |
Rated RPM | 2600 |
Firing order | 1-3-2 |
Starter | electric |
Starter volts | 12 |
Oil capacity | 2.9 qts
2.7 L |
Coolant capacity | 7.5 qts
7.1 L |
Intake valve clearance | 0.010 inches
0.254 mm |
Exhaust valve clearance | 0.010 inches
0.254 mm |
Transmission
Transmission — 6 forward and 2 reverse
Gears | 6 forward and 2 reverse |
Oil capacity | 14.8 qts
14.0 L |
Transmission — hydrostatic
Transmission | hydrostatic |
Gears | infinite forward and reverse |
Oil capacity | 14.8 qts
14.0 L |
![]() | |
Dimensions
Iseki TM3240 Tires | |
|---|---|
Ag front | 5.00-12 |
Ag rear | 9.5-16 |
Lawn/turf front | 23.0x10.50-12 |
Lawn/turf rear | 315/75D-15 |
Dimensions | |
|---|---|
Wheelbase | 59.8 inches
151 cm |
Length | 105.5 inches
267 cm |
Width | 48.4 inches
122 cm |
Ground clearance | 11 inches (gear)
27 cm |
11.4 inches (hydro)
28 cm | |
Iseki TM3240 Weight | |
|---|---|
1,521 lbs (gear)
689 kg | |
1,565 lbs (hydro)
709 kg | |
Max capacity | 3,086 lbs
1399 kg |
Max front axle | 1,433 lbs
650 kg |
Max rear axle | 1,653 lbs
749 kg |
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TM3240 based on its 21.7 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TM3240.
Estimated Continuous Field Runtime: 5.8 hrs
Approximately 5.8 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TM3240 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TM3240.
Converted Equivalents:
Horsepower (HP)21.7 hp
Kilowatts (kW)16.2 kW
Metric Horsepower (PS / CV)22 PS
Direct Competitor Comparison
Compare Iseki TM3240 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TM3240
Engine Power:Diesel (listed): 21.7 hp / 16.2 kW
★ Baseline Reference
Related models
Iseki TH18
- Power:
- 17.8
- Production years:
- 2004 - 2010
Iseki TU180
- Power:
- 17.8
- Production years:
- 1984 - 1986
Iseki TM18
- Power:
- 18
- Production years:
- 2006 - 2012
Iseki TS1910
- Power:
- 18
- Production years:
- 1976 - 1980
Iseki TU318
- Power:
- 18

