Iseki TS2210
The Iseki TS2210 is a tractor produced by Iseki. It is equipped with a 72.25 ci 1.2 L engine. The listed engine power is Diesel (listed): 22 hp / 16.4 kW. Transmission: 9 forward and 3 reverse. Operating weight: 2363 lbs 1071 kg.
Engine Power
Diesel (listed): 22 hp / 16.4 kW
Fuel & Capacities
3.5 gal
13.2 L
Transmission
9 forward and 3 reverse
Operating Weight
2363 lbs
1071 kg
Overview
 | 1976 - 1980
TS SeriesCompact Utility tractor
TS Series
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Iseki |
Compact Utility tractor | |
Variants | |
|---|---|
TS2210F | 4WD |
Iseki TS2210 Engine | |
|---|---|
Isuzu 1.2L 2-cyl diesel | |
Fuel tank | 3.5 gal
13.2 L |
Engine details ...  | |
Iseki TS2210 Transmission | |
|---|---|
9-speed gear | |
Transmission details ...  |
Iseki TS2210 Power | |
|---|---|
Engine | 22 hp
16.4 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Mechanical brakes | |
Open operator station. |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540 (1.375) |
Engine RPM | 635@2600 |
780@2600 | |
1001@2600 | |
1573@2600 | |
Dimensions & Tires | |
|---|---|
Wheelbase | 61.5 inches
156 cm |
Weight | 2363 lbs
1071 kg |
Front tire | 4.00-15SL |
Rear tire | 11.2-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
References | |
|---|---|
 | |
TS & TX Series published in 1975, by Iseki | |
TS1610-TS2810 | |
TS2210 published by Iseki |
Engine
Engine Detail — 72.25 ci / 1.2 L Diesel
Manufacturer | Isuzu 2AB1 |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 72.25 ci
1.2 L |
Bore/Stroke | 3.39x4.02 inches
86 x 102 mm |
Power | 22 hp
16.4 kW |
Rated RPM | 2600 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 9 forward and 3 reverse gear
Type | gear |
Gears | 9 forward and 3 reverse |
Three gears (1-3) plus reverse (R) in three ranges. Additional creeper range available on four-wheel drive models. | |
 | |
Dimensions
Iseki TS2210 Tires | |
|---|---|
Ag front | 4.00-15SL |
Ag rear | 11.2-24 |
Dimensions | |
|---|---|
Wheelbase | 61.5 inches
156 cm |
Length | 111 inches
281 cm |
Width | 51 inches
129 cm |
Height | 49 inches
124 cm |
Weight | 2363 lbs
1071 kg |
Ground clearance | 12 inches
30 cm |
2WD Front tread | 37.4 to 53.2 inches
94 to 135 cm |
Rear tread | 37.4 to 51.2 inches
94 to 130 cm |
Photos
Iseki TS2210 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Iseki TS2210 based on its 22 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TS2210.
Estimated Continuous Field Runtime: 3.1 hrs
Approximately 3.1 hours of continuous field operation at ~75% rated power on a full tank (3.5 gal / 13.2 L).
Estimated 75% Load Fuel Burn~1.1 gal/hr (4.3 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Iseki TS2210 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TS2210.
Converted Equivalents:
Horsepower (HP)22 hp
Kilowatts (kW)16.4 kW
Metric Horsepower (PS / CV)22.3 PS
Direct Competitor Comparison
Compare Iseki TS2210 against same-era industry alternatives in the same horsepower class.
Current Model
Iseki
Iseki TS2210
Engine Power:Diesel (listed): 22 hp / 16.4 kW
★ Baseline Reference
Related models
Iseki TH18
- Power:
- 17.8
- Production years:
- 2004 - 2010
Iseki TU180
- Power:
- 17.8
- Production years:
- 1984 - 1986
Iseki TM18
- Power:
- 18
- Production years:
- 2006 - 2012
Iseki TS1910
- Power:
- 18
- Production years:
- 1976 - 1980
Iseki TU318
- Power:
- 18