John Deere 5010
The John Deere 5010 is a tractor produced by John Deere. It is equipped with a 531 ci 8.7 L engine. The listed engine power is 121.12 hp 90.3 kW. Transmission: Syncro-Range. Operating weight: 12270 to 12925 pounds.
Engine Power
121.12 hp
90.3 kW
Fuel & Capacities
48 gal
181.7 L
Transmission
Syncro-Range
Operating Weight
12,925 lbs
5862 kg
Overview
![]() | 1963 - 1965
New Generation SeriesStandard-tread tractor
New Generation Series
Standard-tread tractor |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Standard-tread tractor | |
Built in Waterloo, Iowa, USA | |
Total built | 7,553 |
Original price | $11,000 (1965) |
John Deere 5010 Engine | |
|---|---|
John Deere 8.7L 6-cyl diesel | |
Engine details ... |
John Deere 5010 Transmission | |
|---|---|
8-speed | |
Transmission details ... |
John Deere 5010 Power | |
|---|---|
Drawbar (claimed) | 109 hp
81.3 kW |
PTO (claimed) | 121 hp
90.2 kW |
Drawbar (tested) | 105.92 hp
79.0 kW |
PTO (tested) | 121.12 hp
90.3 kW |
Performance test details ... | |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Open operator station. |
Capacity | |
|---|---|
Fuel | 48 gal
181.7 L |
Hydraulic system | 17 gal
64.3 L |
Hydraulics | |
|---|---|
Type | closed center |
Capacity | 17 gal
64.3 L |
Pressure | 2250 psi
155.1 bar |
Valves | 1 or 2 |
Pump flow | 20 gpm
75.7 lpm |
Tractor hitch | |
|---|---|
Rear Type | 3/2 |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 104 inches
264 cm |
Weight | 12270 to 12925 pounds |
Front tire | 11.00-16 |
Rear tire | 24.5-32 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Charging system | Delco-Remy or Prestolite generator |
Batteries | 4 |
Battery volts | 6 |
Battery AH | 115 |
References | |
|---|---|
![]() | |
The John Deere 10 Series New Generation Tractors published in 2004, by Hain Publishing | |
Operator's Manual 5010 Standard Tractor (OM-R35980R) published in 1963 | |
Tractors 1918-1976 published by John Deere* | |
Modern Farming published in 1965, by John Deere | |
*Publication contains known errors. |
Engine
Engine Detail — 531 ci / 8.7 L Diesel
Manufacturer | John Deere |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 531 ci
8.7 L |
Bore/Stroke | 4.75x5.00 inches
121 x 127 mm |
Compression | 16:1 |
Rated RPM | 2200 |
Firing order | 1-5-3-6-2-4 |
Starter volts | 24 |
Coolant capacity | 34 qts
32.2 L |
Intake valve clearance | 0.015 inches
0.381 mm |
Exhaust valve clearance | 0.022 inches
0.559 mm |
Oil capacity | 12 qts
11.4 L |
Transmission
Transmission — Syncro-Range
Transmission | Syncro-Range |
Gears | 8 forward and 3 reverse |
Oil capacity | 68 qts
64.4 L |
Oil type | 303 Special |
Four shift stations, each with two forward gears and a reverse (except fourth station). Tractor must be stopped and clutch used to select shift station. Tractor can be shifted between gears in the station on the move while using the clutch. | |
With 24.5-32 rear tires. | |
![]() | |
Dimensions
John Deere 5010 Tires | |
|---|---|
Ag front | 11.00-16 |
Ag rear | 24.5-32 |
Ag front | 7.50-20 |
Ag rear | 18.4-34 |
Dimensions | |
|---|---|
Wheelbase | 104 inches
264 cm |
Length | 172.25 inches
437 cm |
Width | 95.75 inches
243 cm |
Height (steering wheel) | 81.5 inches
207 cm |
Height (exhaust) | 96.25 inches
244 cm |
Shipping weight | 12,270 lbs
5565 kg |
Operating weight | 12,925 lbs
5862 kg |
Ground clearance | 16 inches
40 cm |
Tests
Nebraska Tractor Test 828 | |
|---|---|
Diesel 8-speed 2WD
October 15 - 20, 1962
Link: Nebraska Tractor Test 828 file | |
PTO performance | |
Power at rated engine speed | 121.12 hp
90.3 kW |
Fuel use | 8.1 gal/hour
30.7 l/hour |
Power at rated PTO speed | 108.67 hp
81.0 kW |
Fuel use | 7.0 gal/hour
26.5 l/hour |
Drawbar performance | |
Max power | 105.92 hp
79.0 kW |
Fuel use | 8.0 gal/hour
30.3 l/hour |
Gear 4 used for power test. | |
Max pull | 14174 lbs
6429 kg |
Gear 1 used for pull test. | |
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere 5010 based on its 121.12 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙 | Commercial / Field Scale | Wide commercial field leveling; requires hydraulic remotes. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 5010.
Estimated Continuous Field Runtime: 7.6 hrs
Approximately 7.6 hours of continuous field operation at ~75% rated power on a full tank (48 gal / 181.7 L).
Estimated 75% Load Fuel Burn~6.3 gal/hr (23.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
John Deere 5010 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere 5010.
Converted Equivalents:
Horsepower (HP)121.1 hp
Kilowatts (kW)90.3 kW
Metric Horsepower (PS / CV)122.8 PS
Direct Competitor Comparison
Compare John Deere 5010 against same-era industry alternatives in the same horsepower class.
Current Model
John Deere
John Deere 5010
Engine Power:121.12 hp
90.3 kW
★ Baseline Reference
Related models
John Deere 100F
- Power:
- 97
- Production years:
- 2009 - 2015
John Deere 2955
- Power:
- 97
- Production years:
- 1987 - 1992
John Deere 3140
- Power:
- 97
- Production years:
- 1980 - 1987
John Deere 6100D
- Power:
- 98.9
- Production years:
- 2008 - 2012
John Deere 5625
- Power:
- 99
- Production years:
- 2007 - 2008


