John Deere 9520RT

The John Deere 9520RT is a tractor produced by John Deere. It is equipped with a 826.7 ci 13.5 L engine. The listed engine power is Diesel (gross): 520 hp / 387.8 kW. Transmission: e18 PowerShift. Drive type: crawler. Operating weight: 44910 lbs 20371 kg.

Engine Power

Diesel (gross): 520 hp / 387.8 kW

Drive & Traction

crawler

Fuel & Capacities

350 gal 1324.8 L

Transmission

e18 PowerShift

Operating Weight

44910 lbs 20371 kg

Overview

	2015 - 9R SeriesAgricultural Crawler tractor
2015 -
9R Series
Agricultural Crawler tractor

Production
Manufacturer	John Deere
Agricultural Crawler tractor
Built in Waterloo, Iowa, USA

Variants
9520R	wheeled 4WD
9520RT	crawler
9520RX	articulated crawler

John Deere 9520RT Engine
John Deere 13.5L 6-cyl diesel
Engine details ...

John Deere 9520RT Transmission
18-speed full power shift
Transmission details ...

John Deere 9520RT Power
Engine (gross)	520 hp 387.8 kW
Engine (max)	572 hp 426.5 kW
PTO (claimed)	329 hp 245.3 kW

Mechanical
Drive	crawler
Power steering
Hydraulic wet disc brakes
Trailer brakes	hydraulic OptOptional
Command View Cab III standard with air-conditioning. AutoTrac ready; ISOBUS 11783; JDLink ready

Capacity
Fuel	350 gal 1324.8 L
Exhaust fluid (DEF)	22 gal 83.3 L
Hydraulic system	79.3 gal 300.2 L
	81.3 gal*With hitch and PTO 307.7 L

Hydraulics
Type	closed-center pressure/flow compensated
Capacity	79.3 gal 300.2 L
	81.3 gal*With hitch and PTO 307.7 L
Pressure	2900 psi 200.0 bar
Rear valves	4 to 8
Pump flow	58 gpm 219.5 lpm
	115 gpm*Optional, with second 57GPM pump 435.3 lpm
SCV flow	35 gpm 132.5 lpm
	42 gpm*Flow at 19.1mm coupler with high-flow hydraulic option. 159.0 lpm

Tractor hitch
Rear Type	IV/IVN OptOptional
Rear lift	15000 lbs 6804 kg
	20000 lbs 9072 kg
Drawbar	Cat. 5 HD

Power Take-off (PTO)
Rear PTO	independent OptOptional
Clutch	electro-hydraulic
Rear PTO Type	1000 (1.75)

Dimensions & Tracks
Weight	44910 lbs 20371 kg
30-inch tracks
Full dimensions and tracks ...

Electrical
Ground	negative
Charging system	alternator
Batteries	3
Battery CCA	925
Battery volts	12

Engine

Engine Detail — 826.7 ci / 13.5 L Diesel

Manufacturer	John Deere PSS
Configuration	variable geometry turbocharger diesel, 6-cylinder, liquid-cooled
Displacement	826.7 ci 13.5 L
Bore/Stroke	5.197x6.496 inches 132 x 165 mm
Emissions	Tier IV
Emission control	selective catalytic reduction
Rated Power (gross)	520 hp 387.8 kW
Maximum Power (gross)	572 hp 426.5 kW
Compression	16:1
Rated RPM	2100
Starter	electric
Starter volts	12

Transmission

Transmission — e18 PowerShift

Transmission	e18 PowerShift
Type	full power shift
Gears	18 forward and 6 reverse

Dimensions

John Deere 9520RT Tracks
Width	30 inches 76 cm
Width	36 inches 91 cm

Dimensions
Clearance (drawbar)	12000 inches 30480 cm

John Deere 9520RT Weight
Shipping	44910 lbs 20371 kg
Ballasted	54000 lbs 24494 kg
Max Drawbar	12000 lbs 5443 kg
	10100 lbs*Wide-swing drawbar 4581 kg

Recommended Implements & Sizing Guide

Engineering recommendations for John Deere 9520RT based on its 520 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	8+ Bottom On-Land Hitch8+ 铧重型机外牵引犁	Commercial / Field Scale	High horsepower articulated/4WD field plowing.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	24 to 36 ft Heavy Duty Field Disc7.3 - 11.0 m 超宽重型整地耙	Commercial / Field Scale	Broad-acre grain tillage for high-drawbar tractors.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere 9520RT.

Estimated Continuous Field Runtime: 12.9 hrs

Approximately 12.9 hours of continuous field operation at ~75% rated power on a full tank (350 gal / 1324.9 L).

Estimated 75% Load Fuel Burn~27 gal/hr (102.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours