John Deere 717A
The John Deere 717A is a tractor produced by John Deere Lawn Tractors. It is equipped with a 675 cc 41.2 ci engine. The listed engine power is Gasoline (listed): 19 hp / 14.2 kW. Transmission: Kanzaki DUP 10A. Operating weight: 1132 lbs 513 kg.
Overview
![]() | 2004 - 2007
700 SeriesZero-turn mower
700 Series
Zero-turn mower |
|---|
Production | |
|---|---|
Manufacturer | John Deere |
Zero-turn mower | |
Built in Fuquay-Varina, North Carolina, USA | |
John Deere 717A Engine | |
|---|---|
19HP Kawasaki 675cc 2-cyl gasoline | |
Fuel tank | 8.5 gal
32.2 L |
Engine details ... | |
John Deere 717A Transmission | |
|---|---|
hydrostatic | |
Transmission details ... |
Mechanical | |
|---|---|
Two-wheel drive | |
Power steering | |
Two-post folding ROPS. |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Weight | 1132 lbs
513 kg |
Front tire | 13x5-6 |
Rear tire | 23x9.5-12 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
![]() | |
Commercial & Consumer Equipment Purchasing Guide published in 2007, by John Deere |
Engine
Engine Detail — 675 cc / 41.2 ci Gasoline
Manufacturer | Kawasaki FH601V |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled vertical-shaft V-Twin |
Displacement | 675 cc
41.2 ci |
Bore/Stroke | 2.96x2.99 inches
75 x 76 mm |
Power | 19 hp
14.2 kW |
Fuel system | carburetor |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — Kanzaki DUP 10A
Transmission | Kanzaki DUP 10A |
Type | hydrostatic |
Gears | infinite forward and reverse |
![]() | |
Dimensions
John Deere 717A Tires | |
|---|---|
Lawn/turf front | 13x5-6 |
Lawn/turf rear | 23x9.5-12 |
Dimensions | |
|---|---|
Length | 75 inches
190 cm |
Height (ROPS) | 71.8 inches
182 cm |
Weight | 1132 lbs
513 kg |
Attachments
48" Mower deck | |
|---|---|
Type | mid-mount John Deere |
3-blade | |
Cutting width | 48 inches
121 cm |
Overall width | 62 inches
157 cm |
Cut height | 1.5 to 4.5 inch
3 to 11 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for John Deere Lawn Tractors John Deere 717A based on its 19 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for John Deere Lawn Tractors John Deere 717A.
Estimated Continuous Field Runtime: 8.6 hrs
Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (8.5 gal / 32.2 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
John Deere Lawn Tractors John Deere 717A Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for John Deere Lawn Tractors John Deere 717A.
Converted Equivalents:
Direct Competitor Comparison
Compare John Deere 717A against same-era industry alternatives in the same horsepower class.
John Deere 717A
International Harvester 8-16
Related models
John Deere lawn tractors 116
- Power:
- 16
- Production years:
- 1981 - 1985
John Deere lawn tractors 116H
- Power:
- 16
- Production years:
- 1983 - 1985
John Deere lawn tractors 216
- Power:
- 16
- Production years:
- 1979 - 1987
John Deere lawn tractors 300
- Power:
- 16
- Production years:
- 1975 - 1977
John Deere lawn tractors 316
- Power:
- 16
- Production years:
- 1984 - 1992



