Kubota M95GX-IV
The Kubota M95GX-IV is a tractor produced by Kubota. It is equipped with a 230 ci 3.8 L engine. The listed engine power is Diesel (gross): 104 hp / 77.6 kW. Transmission: 32 forward and reverse. Operating weight: 9480 lbs 4300 kg.
Engine Power
Diesel (gross): 104 hp / 77.6 kW
Fuel & Capacities
50.2 gal
190.0 L
Transmission
32 forward and reverse
Operating Weight
9480 lbs
4300 kg
Overview
 | 2018 -
MGX IV SeriesUtility tractor |
|---|---|
2018 - | |
MGX IV Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Kubota |
Utility tractor | |
Kubota M95GX-IV Engine | |
|---|---|
Kubota 3.8L 4-cyl diesel | |
Fuel tank | 50.2 gal
190.0 L |
Exhaust fluid (DEF) | 4.2 gal
15.9 L |
Engine details ...  | |
Kubota M95GX-IV Power | |
|---|---|
Engine (gross) | 104 hp
77.6 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Differential lock | electro-hydraulic front and rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Valves | 2 to 4 |
Pump flow | 20.2 gpm
76.5 lpm |
Tractor hitch | |
|---|---|
Rear Type | III |
Control | position and lower-link draft control |
Rear lift (at ends) | 11023 lbs
5000 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/1000 |
540/540E OptOptional | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 96.1 inches
244 cm |
100 inches (with suspension)
254 cm | |
Weight | 9480 to 10053 pounds |
Front tire | 380/70R24 |
Rear tire | 520/70R34 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 230 ci / 3.8 L Diesel
Manufacturer | Kubota V3800-CR |
Configuration | turbocharged intercooled diesel, 4-cylinder, liquid-cooled |
Displacement | 230 ci
3.8 L |
Bore/Stroke | 3.94x4.72 inches
100 x 120 mm |
Emissions | Stage IV |
Rated Power (gross) | 104 hp
77.6 kW |
Rated RPM | 2400 |
Torque | 255 lb-ft
345.8 Nm |
Torque RPM | 1500 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed 8-speed power shift | |
32-speed creeper |
Transmission — 24 forward and reverse 8-speed power shift
Type | 8-speed power shift |
Gears | 24 forward and reverse |
Clutch | electro-hydraulic wet disc |
Eight power shift gears in three synchronized ranges with shuttle. | |
Transmission | |
Type | creeper |
Gears | 32 forward and reverse |
Dimensions
Kubota M95GX-IV Tires | |
|---|---|
Standard tires (ag) | Front: 380/70R24. Rear: 520/70R34 |
Dimensions | |
|---|---|
Wheelbase | 96.1 inches
244 cm |
100 inches (with suspension)
254 cm | |
Length | 169.9 inches
431 cm |
Width | 89.4 inches*Minimum width
227 cm |
Height | 111.4 inches
282 cm |
Weight | 9480 lbs
4300 kg |
10053 lbs (with suspension)
4560 kg | |
Front tread | 64.2 to 65.9 inches
163 to 167 cm |
Rear tread | 69.1/71.1/75 inches
175/180/190 cm |
Photos
Kubota M95GX-IV tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Kubota M95GX-IV based on its 104 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Kubota M95GX-IV.
Estimated Continuous Field Runtime: 9.3 hrs
Approximately 9.3 hours of continuous field operation at ~75% rated power on a full tank (50.2 gal / 190 L).
Estimated 75% Load Fuel Burn~5.4 gal/hr (20.5 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Kubota M95GX-IV Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Kubota M95GX-IV.
Converted Equivalents:
Horsepower (HP)104 hp
Kilowatts (kW)77.6 kW
Metric Horsepower (PS / CV)105.4 PS
Direct Competitor Comparison
Compare Kubota M95GX-IV against same-era industry alternatives in the same horsepower class.
Current Model
Kubota
Kubota M95GX-IV
Engine Power:Diesel (gross): 104 hp / 77.6 kW
★ Baseline Reference
Related models
Kubota M85D
- Power:
- 83.8
- Production years:
- 2005 - 2008
Kubota SMZ85
- Power:
- 83.8
- Production years:
- 2006 - 2010
Kubota M8540
- Power:
- 84.6
- Production years:
- 2007 - 2013
Kubota M1-85
- Power:
- 85
- Production years:
- 1988 - 1998
Kubota M8580
- Power:
- 85
- Production years:
- 1991 - 1999