Landini Landforce 125

The Landini Landforce 125 is a tractor produced by Landini. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Diesel (listed): 120 hp / 89.5 kW. Transmission: T-Tronic. Operating weight: 9240 lbs 4191 kg.

Engine Power

Diesel (listed): 120 hp / 89.5 kW

Fuel & Capacities

47.6 gal 180.2 L

Transmission

T-Tronic

Operating Weight

9240 lbs 4191 kg

Overview

	2016 - Landforce SeriesUtility tractor
2016 -
Landforce Series
Utility tractor

Production
Manufacturer	Landini (a part of Argo)
Utility tractor

Landini Landforce 125 Engine
FPT 4.5L 4-cyl diesel
Fuel tank	47.6 gal 180.2 L
Engine details ...

Landini Landforce 125 Power
Engine	120 hp 89.5 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic front and rear
Power steering
Two-post folding ROPS. Cab optional with available air-conditioning.

Hydraulics
Type	open center
	closed center OptOptional
Pressure	2611 psi 180.0 bar
Valves	2 or 3
Pump flow	17.4 gpm (open) 65.9 lpm
	29.1 gpm (closed) 110.1 lpm
Total flow	25.1 gpm (open) 95.0 lpm
	39.1 gpm (closed) 148.0 lpm
Steering flow	7.7 gpm (open) 29.1 lpm
	10 gpm (closed) 37.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control. Landtronic electric draft control optional.
Rear lift	9900 lbs 4490 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000 (1.375)
	540/750 (1.375)OptOptional

Dimensions & Tires
Wheelbase	100 inches 254 cm
Weight	9240 lbs 4191 kg
Front tire	14.9R24
Rear tire	16.9R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

Landforce 115 - 125 published in 2016, by Landini

Engine

Engine Detail — 273.7 ci / 4.5 L Diesel

Manufacturer	FPT NEF4-2V
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	273.7 ci 4.5 L
Bore/Stroke	4.09x5.20 inches 104 x 132 mm
Emissions	Tier 3
Power	120 hp 89.5 kW
Rated RPM	2200
Torque	378 lb-ft 512.6 Nm
Torque RPM	1250
Starter	electric
Starter volts	12

Transmission

Transmission options
12-speed mechanical shuttle
36-speed power shuttle

Transmission — 12 forward and reverse mechanical shuttle

Type	mechanical shuttle
Gears	12 forward and reverse
Clutch	330mm mechanical dry disc
Four synchronized gears in three ranges with mechanical shuttle.

Transmission — T-Tronic

Transmission	T-Tronic
Type	power shuttle
Gears	36 forward and 12 reverse
Clutch	wet disc
The T-Tronic transmission offers a three-range power shift and push-button declutch.

Dimensions

Landini Landforce 125 Tires
Standard tires (ag)	Front: 14.9R24. Rear: 16.9R38

Dimensions
Wheelbase	100 inches 254 cm
Length	187 inches 474 cm
Width	82 inches*Minimum width 208 cm
Height (ROPS)	109.5 inches 278 cm
Height (cab)	109 inches 276 cm
ROPS Weight	9240 lbs 4191 kg
Ground clearance	14.5 inches 36 cm

Photos

Landini Landforce 125 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Landini Landforce 125 based on its 120 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Landini Landforce 125.

Estimated Continuous Field Runtime: 7.6 hrs

Approximately 7.6 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).

Estimated 75% Load Fuel Burn~6.2 gal/hr (23.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours