Massey Ferguson 1098

The Massey Ferguson 1098 is a tractor produced by Massey Ferguson. It is equipped with a 354 ci 5.8 L engine. The listed engine power is Diesel (listed): 106 hp / 79.0 kW. Transmission: 8 forward and 2 reverse. Operating weight: 13285 lbs 6026 kg.

Engine Power

Diesel (listed): 106 hp / 79.0 kW

Fuel & Capacities

37.5 gal 141.9 L

Transmission

8 forward and 2 reverse

Operating Weight

13285 lbs 6026 kg

Overview

	1972 - 1977 Row-Crop tractor

Production
Manufacturer	Massey Ferguson
Row-Crop tractor
Built in Granadero Baigorria, Santa Fe, Argentina

Massey Ferguson 1098 Engine
Perkins 5.8L 6-cyl diesel
Engine details ...

Massey Ferguson 1098 Transmission
8-speed gear
Transmission details ...

Massey Ferguson 1098 Power
Engine	106 hp 79.0 kW

Mechanical
Two-wheel drive
Power steering
Disc brakes
Open operator station.

Capacity
Fuel	37.5 gal 141.9 L
Hydraulic system	9 gal 34.1 L

Hydraulics
Capacity	9 gal 34.1 L

Power Take-off (PTO)
Rear PTO Type	540 (1.375)
Engine RPM	540@1680

Dimensions & Tires
Wheelbase	95.3 inches 242 cm
Weight	13285 lbs 6026 kg
Front tire	11.00x16
Rear tire	24.5x32
Full dimensions and tires ...

Electrical
Ground	negative
Batteries	2
Battery volts	12

Engine

Engine Detail — 354 ci / 5.8 L Diesel

Manufacturer	Perkins A.6-354
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	354 ci 5.8 L
Bore/Stroke	3.875x5.00 inches 98 x 127 mm
Power	106 hp 79.0 kW
Rated RPM	2250
Starter	electric
Starter volts	12
Oil capacity	17.4 qts 16.5 L
Coolant capacity	21.1 qts 20.0 L

Transmission

Transmission — 8 forward and 2 reverse gear

Type	gear
Gears	8 forward and 2 reverse
Clutch	304.8mm dry disc
Oil capacity	35.9 qts 34.0 L
With 24.5x32 rear tires.

Dimensions

Massey Ferguson 1098 Tires
Ag front	11.00x16
Ag rear	24.5x32
Ag front	7.50x18
Ag rear	18.4x34

Dimensions
Wheelbase	95.3 inches 242 cm
Length	148.8 inches 377 cm
Width	100 inches 254 cm
Height (steering wheel)	73.2 inches 185 cm
Weight	13285 lbs 6026 kg

Photos

Massey Ferguson 1098 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 1098 based on its 106 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 1098.

Estimated Continuous Field Runtime: 6.8 hrs

Approximately 6.8 hours of continuous field operation at ~75% rated power on a full tank (37.5 gal / 142 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours