Massey Ferguson 475

The Massey Ferguson 475 is a tractor produced by Massey Ferguson. It is equipped with a 365.3 ci 6.0 L engine. The listed engine power is Diesel (listed): 130 hp / 96.9 kW. Transmission: 12 forward and 4 reverse. Drive type: 4x2 2WD. Operating weight: 9083 to 9965 pounds.

Engine Power

Diesel (listed): 130 hp / 96.9 kW

Drive & Traction

4x2 2WD

Fuel & Capacities

55.5 gal 210.1 L

Transmission

12 forward and 4 reverse

Operating Weight

9083 to 9965 pounds

Overview

	2001 - 2010 400 SeriesUtility tractor 400 Series Utility tractor

Production
Manufacturer	Massey Ferguson
Utility tractor
Built in Canoas, Brazil

Massey Ferguson 475 Engine
Perkins 6.0L 6-cyl diesel
Fuel tank	55.5 gal 210.1 L
Engine details ...

Massey Ferguson 475 Transmission
12-speed synchromesh
Transmission details ...

Massey Ferguson 475 Power
Engine	130 hp 96.9 kW
PTO (claimed)	110.3 hp 82.3 kW

Mechanical
Drive	4x2 2WD
	4x4 MFWD 4WD (optional)
Steering	hydrostatic power
Wet disc brakes
Open operator station. Two-post ROPS optional with available canopy.

Hydraulics
Pressure	2466 psi 170.0 bar
Pump flow	13.2 gpm 50.0 lpm

Tractor hitch
Rear Type	II
Control	draft, position, and response control

Power Take-off (PTO)
Rear PTO	live
	independent (optional)
Rear PTO Type	540 (1.375)
	540/1000 (optional)
Engine RPM	540@1900

Dimensions & Tires
2WD Wheelbase	106.7 inches 271 cm
4WD Wheelbase	107.5 inches 273 cm
Weight	9083 to 9965 pounds
Front tire	9.00-16
Rear tire	18.4-34 (2WD)
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 365.3 ci / 6.0 L Diesel

Manufacturer	Perkins 1006.6T
Configuration	turbocharged diesel, 6-cylinder, liquid-cooled
Displacement	365.3 ci 6.0 L
Bore/Stroke	3.937x5.00 inches 100 x 127 mm
Power	130 hp 96.9 kW
Fuel system	direct injection
Rated RPM	2200
Torque	376.2 lb-ft 510.1 Nm
Torque RPM	1400
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and 4 reverse synchromesh

Type	synchromesh
Gears	12 forward and 4 reverse

Dimensions

Massey Ferguson 475 Tires
Standard tires (ag)	Front: 9.00-16. Rear: 18.4-34 (2WD)
	Front: 14.9-24. Rear: 18.4-34 (4WD)

Dimensions
2WD Wheelbase	106.7 inches 271 cm
4WD Wheelbase	107.5 inches 273 cm
2WD Length	179.5 inches 455 cm
4WD Length	182.3 inches 463 cm
Height (ROPS)	103.9 inches 263 cm
Height (exhaust)	110.2 inches 279 cm
2WD Shipping weight	9,083 lbs 4120 kg
4WD Shipping weight	9,965 lbs 4520 kg

Photos

Massey Ferguson 475 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 475 based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 475.

Estimated Continuous Field Runtime: 8.2 hrs

Approximately 8.2 hours of continuous field operation at ~75% rated power on a full tank (55.5 gal / 210.1 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours