Massey Ferguson 6470

The Massey Ferguson 6470 is a tractor produced by Massey Ferguson. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 125 hp / 93.2 kW. Transmission: Dyna-6. Operating weight: 10163 lbs 4609 kg.

Engine Power

Diesel (listed): 125 hp / 93.2 kW

Fuel & Capacities

38.3 gal 145.0 L

Transmission

Dyna-6

Operating Weight

10163 lbs 4609 kg

Overview

	2008 - 2012 6400 SeriesRow-Crop tractor 6400 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor

Massey Ferguson 6470 Engine
SisuDiesel 4.4L 4-cyl diesel
Fuel tank	38.3 gal 145.0 L
	55.5 galOptOptional 210.1 L
Engine details ...

Massey Ferguson 6470 Power
Engine	125 hp 93.2 kW

Mechanical
Four-wheel drive
Power steering
Cab standard with air-conditioning.

Hydraulics
Type	closed center load sensing
Pressure	2901 psi 200.0 bar
Valves	2 to 4
Pump flow	29.1 gpm 110.1 lpm

Tractor hitch
Rear Type	III/II
Rear lift (at ends)	12897 lbs 5850 kg
	15653 lbsOptOptional 7100 kg
Front lift	5512 lbs 2500 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000 (1.375)
Engine RPM	540@1980
	540E@1530
	1000@2030
Front PTO	independent OptOptional
Clutch	electro-hydraulic
Front PTO Type	1000 (1.375)
Engine RPM	1000@2000

Dimensions & Tires
Wheelbase	105.1 inches 266 cm
Weight	10163 lbs 4609 kg
Front tire	420/70R28
Rear tire	520/70R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	SisuDiesel 44CTA
Configuration	turbocharged intercooled diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Tier III
Power	125 hp 93.2 kW
Maximum Power	145 hp 108.1 kW
Starter	electric
Starter volts	12

Transmission

Transmission options
24-speed partial power shift
36-speed creeper

Transmission — Dyna-6

Transmission	Dyna-6
Type	partial power shift
Gears	24 forward and reverse
Six power shift gears in four ranges.
Type	creeper
Gears	36 forward and reverse

Dimensions

Massey Ferguson 6470 Tires
Standard tires (ag)	Front: 420/70R28. Rear: 520/70R38

Dimensions
Wheelbase	105.1 inches 266 cm
Length	170.1 inches 432 cm
Width	90 inches 228 cm
Height (cab)	112.6 inches 286 cm
Weight	10163 lbs 4609 kg

Photos

Massey Ferguson 6470

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 6470 based on its 125 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 6470.

Estimated Continuous Field Runtime: 5.9 hrs

Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (38.3 gal / 145 L).

Estimated 75% Load Fuel Burn~6.5 gal/hr (24.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours