Massey Ferguson 7714

The Massey Ferguson 7714 is a tractor produced by Massey Ferguson. It is equipped with a 402.5 ci 6.6 L engine. The listed engine power is Diesel (gross): 130 hp / 96.9 kW. Transmission: Dyna-4.

Engine Power

Diesel (gross): 130 hp / 96.9 kW

Fuel & Capacities

82 gal 310.4 L

Transmission

Dyna-4

Overview

	2015 - 2018 7700 SeriesRow-Crop tractor 7700 Series Row-Crop tractor

Production
Manufacturer	Massey Ferguson (a part of AGCO)
Row-Crop tractor
Built in Beauvais, France
Original price was $131,993 in 2015 with Dyna-4, Classic

Massey Ferguson 7714 Engine
AGCO POWER 6.6L 6-cyl diesel
Fuel tank	82 gal 310.4 L
Exhaust fluid (DEF)	8 gal 30.3 L
Engine details ...

Massey Ferguson 7714 Transmission
16-speed four-speed power shift
Transmission details ...

Massey Ferguson 7714 Power
Engine (gross)	130 hp 96.9 kW
PTO (claimed)	115 hp 85.8 kW
Drawbar (tested)	108.8 hp 81.1 kW
PTO (tested)	136.8 hp 102.0 kW
Performance test details ...

Mechanical
Four-wheel drive
Differential lock	full-locking electro-hydraulic
Power steering
Wet disc brakes
Cab standard with air-conditioning. AGCOMMAND ready

Hydraulics
Type	closed center load sensing
Pressure	2900 psi 200.0 bar
Pump flow	29 gpm 109.8 lpm

Tractor hitch
Rear Type	III/II
Control	electronic lower-link draft sensing
Drawbar	Cat. 2

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540/1000

Dimensions & Tires
Front tire	380/85R28
Rear tire	460/85R38
Full dimensions and tires ...

Electrical
Ground	negative
Charging system	alternator
Charging amps	175
Batteries	2
Battery CCA	600
Battery volts	12

References

7700 Series published in 2015, by Massey Ferguson

Engine

Engine Detail — 402.5 ci / 6.6 L Diesel

Manufacturer	AGCO POWER
Configuration	turbocharged air-to-air aftercooled diesel, 6-cylinder, liquid-cooled
Displacement	402.5 ci 6.6 L
Bore/Stroke	4.252x4.724 inches 108 x 120 mm
Emissions	Tier 4
Emission control	selective catalytic reduction (SCR)
Power (gross)	130 hp 96.9 kW
Fuel system	common rail
Cooling system	electronic viscous fan
Air cleaner	dual dry element
Starter	electric
Starter volts	12

Transmission

Transmission — Dyna-4

Transmission	Dyna-4
Type	four-speed power shift
Gears	16 forward and reverse

Dimensions

Massey Ferguson 7714 Tires
Standard tires (ag)	Front: 380/85R28. Rear: 460/85R38

Dimensions
Flange rear axle

Tests

OCED Tractor Test 2994
Diesel Dyna-4 4WD June 2016 - July 2016, Link: OCED Tractor Test 2994 file
PTO performance
Max power	136.8 hp 102.0 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Power at rated engine speed	129.4 hp 96.5 kW
Fuel use	7.7 gal/hour 29.1 l/hour
Power at rated PTO speed	134.4 hp 100.2 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Drawbar performance
Max power	108.8 hp 81.1 kW
Fuel use	7.8 gal/hour 29.5 l/hour
Gear 3A used for power test.
Max pull	12835 lbs 5821 kg
Gear 1D used for pull test.

Photos

Massey Ferguson 7714 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Massey Ferguson 7714 based on its 130 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Massey Ferguson 7714.

Estimated Continuous Field Runtime: 12.1 hrs

Approximately 12.1 hours of continuous field operation at ~75% rated power on a full tank (82 gal / 310.4 L).

Estimated 75% Load Fuel Burn~6.8 gal/hr (25.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours