McCormick Intl X60.20

The McCormick Intl X60.20 is a tractor produced by Mccormick Intl. It is equipped with a 268.5 ci 4.4 L engine. The listed engine power is Diesel (listed): 92.5 hp / 69.0 kW. Transmission: Xtrashift. Operating weight: 9259 lbs 4199 kg.

Engine Power

Diesel (listed): 92.5 hp / 69.0 kW

Fuel & Capacities

47.6 gal 180.2 L

Transmission

Xtrashift

Operating Weight

9259 lbs 4199 kg

Overview

	2011 - X60 SeriesUtility tractor
2011 -
X60 Series
Utility tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Utility tractor

McCormick Intl X60.20 Engine
Perkins 4.4L 4-cyl diesel
Fuel tank	47.6 gal 180.2 L
Engine details ...

McCormick Intl X60.20 Power
Engine	92.5 hp 69.0 kW
PTO (claimed)	83.3 hp 62.1 kW

Mechanical
Four-wheel drive
Steering	hydrostatic power
Wet disc brakes
Trailer brakes	hydraulic (optional)
	pneumatic (optional)
Cab standard. Optional air-conditioning.

Hydraulics
Valves	3 to 5
Pump flow	15.85 gpm 60.0 lpm
Steering flow	7.9 gpm 29.9 lpm

Tractor hitch
Rear Type	II
Control	position and draft control
Rear lift	11020 lbs 4998 kg
Front Hitch	optional
Front lift	5512 lbs 2500 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	hydraulic wet disc
Rear PTO Type	540/750
	540/1000
	540/750/1000
Front PTO	independent (optional)
Front PTO Type	1000

Dimensions & Tires
Wheelbase	96.5 inches 245 cm
Weight	9259 lbs 4199 kg
Front tire	440/65R24
Rear tire	540/65R34
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 268.5 ci / 4.4 L Diesel

Manufacturer	Perkins 1104D-44TA
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	268.5 ci 4.4 L
Bore/Stroke	4.134x5.00 inches 105 x 127 mm
Emissions	Tier 3
Power	92.5 hp 69.0 kW
Torque	289.9 lb-ft 393.1 Nm
Starter	electric
Starter volts	12

Transmission

Transmission options
36-speed
48-speed

Transmission — Xtrashift

Transmission	Xtrashift
Gears	36 forward and 12 reverse
Clutch	wet discs

Transmission — Xtrashift

Transmission	Xtrashift
Gears	48 forward and 16 reverse
Clutch	wet discs

Dimensions

McCormick Intl X60.20 Tires
Standard tires (ag)	Front: 440/65R24. Rear: 540/65R34

Dimensions
Wheelbase	96.5 inches 245 cm
Length	173.2 inches 439 cm
Width	92.4 inches 234 cm
Height (cab)	107.9 inches 274 cm
Weight	9259 lbs 4199 kg
Ground clearance	16.5 inches 41 cm

Photos

McCormick Intl X60.20 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X60.20 based on its 92.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X60.20.

Estimated Continuous Field Runtime: 9.9 hrs

Approximately 9.9 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).

Estimated 75% Load Fuel Burn~4.8 gal/hr (18.2 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours