McCormick Intl X70.40

The McCormick Intl X70.40 is a tractor produced by Mccormick Intl. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Diesel (listed): 150 hp / 111.9 kW. Transmission: Xtraspeed Creeper. Operating weight: 14330 lbs 6500 kg.

Engine Power

Diesel (listed): 150 hp / 111.9 kW

Fuel & Capacities

79.25 gal 300.0 L

Transmission

Xtraspeed Creeper

Operating Weight

14330 lbs 6500 kg

Overview

	2012 - X70 SeriesRow-Crop tractor
2012 -
X70 Series
Row-Crop tractor

Production
Manufacturer	McCormick Intl (a part of Argo)
Row-Crop tractor

McCormick Intl X70.40 Engine
BetaPower 6.7L 6-cyl diesel
Fuel tank	79.25 gal 300.0 L
Exhaust fluid (DEF)	10 gal 37.9 L
Engine details ...

McCormick Intl X70.40 Power
Engine	150 hp 111.9 kW

Mechanical
Four-wheel drive
Differential lock	electro-hydraulic rear
	limited-slip front
Steering	hydrostatic power
Wet disc brakes
Cab standard with air-conditioning. Optional electro-hydraulic cab suspension.

Hydraulics
Valves	3 to 4
Pump flow	29.1 gpm 110.1 lpm

Tractor hitch
Rear lift	15870 lbs 7198 kg
Front Hitch	optional

Power Take-off (PTO)
Rear PTO	independent
Clutch	electro-hydraulic wet disc
Rear PTO Type	540/1000
Front PTO	independent (optional)

Dimensions & Tires
Wheelbase	108.4 inches 275 cm
Weight	14330 lbs 6500 kg
Front tire	420/85R28
Rear tire	520/85R38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 410.6 ci / 6.7 L Diesel

Manufacturer	BetaPower
Configuration	turbocharged diesel, 6-cylinder 24-valve, liquid-cooled
Displacement	410.6 ci 6.7 L
Bore/Stroke	4.094x5.197 inches 104 x 132 mm
Emissions	Interim Tier 4
Emission control	selective catalytic reduction (SCR)
Power	150 hp 111.9 kW
Maximum Power	175 hp 130.5 kW
Fuel system	high pressure common rail
Rated RPM	2200
Torque	466.1 lb-ft 632.0 Nm
Starter	electric
Starter volts	12

Transmission

Transmission options
32-speed eight-speed power shift
48-speed

Transmission — Xtraspeed

Transmission	Xtraspeed
Type	eight-speed power shift
Gears	32 forward and 24 reverse
Transmission	Xtraspeed Creeper
Gears	48 forward and 40 reverse

Dimensions

McCormick Intl X70.40 Tires
Standard tires (ag)	Front: 420/85R28. Rear: 520/85R38

Dimensions
Wheelbase	108.4 inches 275 cm
Length	205.1 inches 520 cm
Width	94.5 inches 240 cm
Height (cab)	114.2 inches 290 cm
Weight	14330 lbs 6500 kg
Ground clearance	19.9 inches 50 cm
Front axle	4WD
Front axle	4WD hydraulic suspension

Photos

McCormick Intl X70.40 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Mccormick Intl X70.40 based on its 150 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	5 to 7 Bottom (18")5 - 7 铧 (45 cm)	Commercial / Field Scale	Large acreage tillage; requires front ballast weights.
Rotary Cutter / MowerMowing & Clearing	15 to 20 ft Batwing4.6 - 6.1 m 宽幅折叠翼	Commercial / Field Scale	Large commercial field and roadside mowing operations.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	15 to 22 ft Folding Disc4.5 - 6.7 m 折叠式圆盘耙	Commercial / Field Scale	Wide commercial field leveling; requires hydraulic remotes.
Hay BalerHay & Forage	Large Square Baler (3x4 or 4x4)大方捆商用打捆机 (1.2x1.2 m)	Commercial / Field Scale	High-capacity commercial forage harvesting (1000 RPM PTO).

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Mccormick Intl X70.40.

Estimated Continuous Field Runtime: 10.2 hrs

Approximately 10.2 hours of continuous field operation at ~75% rated power on a full tank (79.3 gal / 300 L).

Estimated 75% Load Fuel Burn~7.8 gal/hr (29.5 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours