New Holland 5635
The New Holland 5635 is a tractor produced by New Holland. It is equipped with a 238 ci 3.9 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: Dual Command. Operating weight: 6393 to 7496 pounds.
Overview
![]() | 1996 - 1999
35 SeriesUtility tractor
35 Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
Built in Italy | |
Original price was $31,100 in 1999 | |
New Holland 5635 Engine | |
|---|---|
Iveco 3.9L 4-cyl diesel | |
Fuel tank | 29 gal
109.8 L |
Engine details ... | |
New Holland 5635 Power | |
|---|---|
Engine | 75 hp
55.9 kW |
PTO (claimed) | 66 hp
49.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Two-post foldable ROPS. Cab optional with air-conditioning. |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 to 3 |
Pump flow | 14.5 gpm
54.9 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | mechanical, lower link |
Rear lift (at 24"/610mm) | 5722 lbs
2595 kg |
6340 lbsOptOptional
2875 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | electro-hydraulic wet disc |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 92.2 inches
234 cm |
4WD Wheelbase | 91.1 inches
231 cm |
Weight | 6393 to 7496 pounds |
Front tire | 7.50-16 |
Rear tire | 16.9-30 |
Full dimensions and tires ... | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
ROPS Charging amps | 45 |
Cab Charging amps | 65 |
Battery volts | 12 |
References | |
|---|---|
![]() | |
56 to 86 PTO hp Tractors published in 1996, by New Holland | |
35 Series Tractors published in 1996, by New Holland | |
North American Buyer's Guide published in 1997, by New Holland |
Engine
Engine Detail — 238 ci / 3.9 L Diesel
Manufacturer | Iveco 8045.05 |
Fuel Type | Diesel |
Configuration | 4-cylinder 8-valve, liquid-cooled |
Displacement | 238 ci
3.9 L |
Bore/Stroke | 4.094x4.527 inches
104 x 115 mm |
Power | 75 hp
55.9 kW |
Pre-heating | Thermostart |
Rated RPM | 2500 |
Starter volts | 12 |
Oil capacity | 12.4 qts
11.7 L |
Coolant capacity | 14.8 qts (ROPS)
14.0 L |
16.9 qts (cab)
16.0 L |
Transmission
Transmission options | |
|---|---|
12-speed partially synchronized | |
12-speed partiallly synchronized with sync shuttle | |
24-speed partial power shift |
Transmission — Synchro
Transmission | Synchro |
Type | partially synchronized |
Gears | 12 forward and 4 reverse |
Four gears in three ranges, plus reverse. Gear shifts are synchronized. | |
![]() | |
Transmission — Synchro Command
Transmission | Synchro Command |
Type | partiallly synchronized with sync shuttle |
Gears | 12 forward and reverse |
Four gears in three ranges with left-hand reverser. Gear and shuttle shifts are synchronized. | |
Transmission — Dual Command
Transmission | Dual Command |
Type | partial power shift |
Gears | 24 forward and 12 reverse |
Four gears in three ranges with two-speed power shift and left-hand reverser. The Dual Command provides push-button shifting to lower gear at each speed. | |
Dimensions
New Holland 5635 Tires | |
|---|---|
Ag front | 7.50-16 |
Ag rear | 16.9-30 |
Dimensions | |
|---|---|
2WD Wheelbase | 92.2 inches
234 cm |
4WD Wheelbase | 91.1 inches
231 cm |
Width | 72.6 inches
184 cm |
Front tread | 56 to 84 inches
142 to 213 cm |
Rear tread | 60 to 84 inches
152 to 213 cm |
New Holland 5635 Weight | |
|---|---|
2WD ROPS Shipping | 6393 lbs
2899 kg |
2WD Cab Shipping | 6834 lbs
3099 kg |
4WD ROPS Shipping | 7055 lbs
3200 kg |
4WD Cab Shipping | 7496 lbs
3400 kg |
New Holland 5635 Height | |
|---|---|
ROPS | 105.5 inches
267 cm |
84 inches (folded)
213 cm | |
Cab | 97.5 inches
247 cm |
Photos
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland 5635 based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland 5635.
Estimated Continuous Field Runtime: 7.4 hrs
Approximately 7.4 hours of continuous field operation at ~75% rated power on a full tank (29 gal / 109.8 L).
Engine Crankcase Oil
Transmission & Hydraulic System
Engine Cooling System
New Holland 5635 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland 5635.
Converted Equivalents:
Direct Competitor Comparison
Compare New Holland 5635 against same-era industry alternatives in the same horsepower class.
New Holland 5635
Related models
New Holland 4010
- Power:
- 60
New Holland 4630
- Power:
- 60
- Production years:
- 1994 - 1999
New Holland 4635
- Power:
- 60
- Production years:
- 1996 - 1999
New Holland Boomer 4060
- Power:
- 60
- Production years:
- 2008 - 2011
New Holland L60
- Power:
- 60
- Production years:
- 1996 - 1999



