New Holland TK76
The New Holland TK76 is a tractor produced by New Holland. It is equipped with a 220 ci 3.6 L engine. The listed engine power is Diesel (listed): 71 hp / 52.9 kW. Transmission: 8 forward and reverse. Drive type: crawler. Operating weight: 8460 lbs 3837 kg.
Engine Power
Diesel (listed): 71 hp / 52.9 kW
Drive & Traction
crawler
Fuel & Capacities
31.7 gal
120.0 L
Transmission
8 forward and reverse
Operating Weight
8460 lbs
3837 kg
Overview
 | 2000 - 2004
TK SeriesAgricultural Crawler tractor
TK Series
Agricultural Crawler tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Agricultural Crawler tractor | |
New Holland TK76 Engine | |
|---|---|
Iveco 3.6L 4-cyl diesel | |
Fuel tank | 31.7 gal
120.0 L |
Engine details ...  | |
New Holland TK76 Transmission | |
|---|---|
8-speed constant mesh | |
Transmission details ...  |
New Holland TK76 Power | |
|---|---|
Engine | 71 hp
52.9 kW |
PTO (claimed) | 60 hp
44.7 kW |
Mechanical | |
|---|---|
Drive | crawler |
Two-post mid-mount folding ROPS. | |
Hydraulics | |
|---|---|
Rear valves | 3 to 5 |
Pump flow | 12 gpm
45.4 lpm |
Tractor hitch | |
|---|---|
Rear Type | II/I |
Control | Top-link draft sensing. |
Rear lift (at 24"/610mm) | 4078 lbs
1849 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | 280mm dry disc |
Rear PTO Type | 540/1000 |
Engine RPM | 540@2199 |
1000@2381 | |
Dimensions & Tracks | |
|---|---|
Wheelbase | 62.4 inches
158 cm |
Weight | 8460 lbs
3837 kg |
12.2-inch tracks | |
Full dimensions and tracks ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 45 |
Battery volts | 12 |
References | |
|---|---|
 | |
TK Agricultural Crawler Tractors published in 2001, by New Holland |
Engine
Engine Detail — 220 ci / 3.6 L Diesel
Manufacturer | Iveco 8045.06 |
Fuel Type | Diesel |
Configuration | 4-cylinder, liquid-cooled |
Displacement | 220 ci
3.6 L |
Bore/Stroke | 3.937x4.527 inches
100 x 115 mm |
Power | 71 hp
52.9 kW |
Rated RPM | 2500 |
Starter volts | 12 |
Transmission
Transmission — 8 forward and reverse constant mesh
Type | constant mesh |
Gears | 8 forward and reverse |
Clutch | 292mm dry disc |
Dimensions
New Holland TK76 Tracks | |
|---|---|
Width | 12.2 inches
30 cm |
Dimensions | |
|---|---|
Wheelbase | 62.4 inches
158 cm |
Length | 142.7 inches
362 cm |
Width | 55.5 inches
140 cm |
Height (hood) | 51.2 inches
130 cm |
Height (ROPS) | 92.5 inches
234 cm |
Weight | 8460 lbs
3837 kg |
Gauge | 43.3 inches
109 cm |
Photos
New Holland TK76 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland TK76 based on its 71 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙 | Medium Duty | Field leveling and clod breaking behind plows. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TK76.
Estimated Continuous Field Runtime: 8.6 hrs
Approximately 8.6 hours of continuous field operation at ~75% rated power on a full tank (31.7 gal / 120 L).
Estimated 75% Load Fuel Burn~3.7 gal/hr (14 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland TK76 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland TK76.
Converted Equivalents:
Horsepower (HP)71 hp
Kilowatts (kW)52.9 kW
Metric Horsepower (PS / CV)72 PS
Direct Competitor Comparison
Compare New Holland TK76 against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland TK76
Engine Power:Diesel (listed): 71 hp / 52.9 kW
★ Baseline Reference
Related models
New Holland TN60A
- Power:
- 57
- Production years:
- 2004 - 2008
New Holland TN65
- Power:
- 57
- Production years:
- 1998 - 2003
New Holland 3930
- Power:
- 57.8
- Production years:
- 1990 - 2002
New Holland 4010
- Power:
- 60
New Holland 4630
- Power:
- 60
- Production years:
- 1994 - 1999