New Holland TL75E Exitus

The New Holland TL75E Exitus is a tractor produced by New Holland. It is equipped with a 238.5 ci 3.9 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: 12 forward and reverse. Operating weight: 6945 to 8686 pounds.

Engine Power

Diesel (listed): 75 hp / 55.9 kW

Fuel & Capacities

26.1 gal 98.8 L

Transmission

12 forward and reverse

Operating Weight

6945 to 8686 pounds

Overview

	2002 - 2023 Model year 2002-20062002-20122013-2023 TL Exitus Series

Production
Manufacturer	New Holland
Built in Curitiba, Brazil

New Holland TL75E Engine
Iveco 3.9L 4-cyl diesel
Fuel tank	26.1 gal 98.8 L
Engine details ...

New Holland TL75E Transmission
12-speed shuttle
Transmission details ...

New Holland TL75E Power
Engine	75 hp 55.9 kW

Mechanical
Two- or four-wheel drive
Differential lock	mechanical rear
Power steering
Hydraulic wet disc brakes
Two-post ROPS.

Hydraulics
Type	open center
Pump flow	11.76 gpm 44.5 lpm

Tractor hitch
Rear Type	II
Rear lift (at 24"/610mm)	7363 lbs 3339 kg

Power Take-off (PTO)
Rear PTO	independent
Rear PTO Type	540 (1.375)

Dimensions & Tires
Weight	6945 to 8686 pounds
Front tire	12.4x24
Rear tire	18.4x30
Full dimensions and tires ...

Electrical
Charging system	alternator
Battery volts	12

Engine

Engine Detail — 238.5 ci / 3.9 L Diesel

Manufacturer	Iveco
Fuel Type	Diesel
Configuration	4-cylinder, liquid-cooled
Displacement	238.5 ci 3.9 L
Bore/Stroke	4.094x4.528 inches 104 x 115 mm
Power	75 hp 55.9 kW
Starter	electric
Starter volts	12

Transmission

Transmission — 12 forward and reverse shuttle

Type	shuttle
Gears	12 forward and reverse
Clutch	mechanical cerametallic disc
Four gears (1-4) in four ranges (I-IV) with shuttle shift.

Dimensions

New Holland TL75E Tires
Standard tires (ag)	Front: 12.4x24. Rear: 18.4x30

Dimensions
2WD Shipping weight	6945 lbs 3150 kg
4WD Shipping weight	8686 lbs 3939 kg

Photos

New Holland TL75E Exitus tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for New Holland TL75E Exitus based on its 75 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	3 to 4 Bottom (16")3 - 4 铧 (40 cm)	Heavy Duty	Suitable for medium loam and stubble turnover.
Rotary Cutter / MowerMowing & Clearing	7 to 8 ft (84-96 in)2.1 - 2.4 m	Heavy Duty	Heavy-duty twin spindle cutter for overgrown acreage.
Rotary TillerSeedbed Prep	78 to 84 in200 - 215 cm	Heavy Duty	Heavy commercial tiller with multi-speed gearbox.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机	Heavy Duty	Silage and dry hay; 540 RPM PTO with slip-clutch.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TL75E Exitus.

Estimated Continuous Field Runtime: 6.7 hrs

Approximately 6.7 hours of continuous field operation at ~75% rated power on a full tank (26.1 gal / 98.8 L).

Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours