New Holland TS125A
The New Holland TS125A is a tractor produced by New Holland. It is equipped with a 410.6 ci 6.7 L engine. The listed engine power is Engine Detail — 410.6 ci / 6.7 L (listed): 116 hp / 86.5 kW. Transmission: Electro Command. Operating weight: 10890 lbs 4939 kg.
Engine Power
Engine Detail — 410.6 ci / 6.7 L (listed): 116 hp / 86.5 kW
Fuel & Capacities
67.1 gal
254.0 L
Transmission
Electro Command
Operating Weight
10890 lbs
4939 kg
Overview
 | 2003 - 2005
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | New Holland |
Utility tractor | |
New Holland TS125A Engine | |
|---|---|
New Holland 6.7L 6-cyl | |
Fuel tank | 67.1 gal
254.0 L |
SuperSteer Fuel tank | 62.3 gal
235.8 L |
Engine details ...  | |
New Holland TS125A Power | |
|---|---|
Engine | 116 hp
86.5 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Wet disc brakes | |
Horizon Cab standard with air-conditioning. |
Hydraulics | |
|---|---|
Type | open center |
closed-center load sensing OptOptional | |
Pressure | 3046 psi
210.0 bar |
Rear valves | 4 |
Mid valves | 2 |
Pump flow | 21.1 gpm
79.9 lpm |
29.9 gpm*Closed center
113.2 lpm | |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 104.4 inches
265 cm |
Terraglide Wheelbase | 104.8 inches
266 cm |
SuperSteer Wheelbase | 108.7 inches
276 cm |
Weight | 10890 lbs
4939 kg |
Front tire | 14.9R28 |
Rear tire | 18.4R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Battery volts | 12 |
Engine
Engine Detail — 410.6 ci / 6.7 L
Manufacturer | New Holland |
Configuration | turbocharged intercooled, 6-cylinder 24-valve, liquid-cooled |
Displacement | 410.6 ci
6.7 L |
Bore/Stroke | 4.09x5.20 inches
104 x 132 mm |
Power | 116 hp
86.5 kW |
Maximum Power | 154 hp
114.8 kW |
Fuel system | electronic common rail |
Rated RPM | 2200 |
Torque | 417.5 lb-ft
566.1 Nm |
Torque RPM | 1400 |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission options | |
|---|---|
24-speed two-speed power shift | |
16-speed partial power shift |
Transmission — Dual Command
Transmission | Dual Command |
Type | two-speed power shift |
Gears | 24 forward and reverse |
Transmission — Electro Command
Transmission | Electro Command |
Type | partial power shift |
Gears | 16 forward and reverse |
Dimensions
New Holland TS125A Tires | |
|---|---|
Standard tires (ag) | Front: 14.9R28. Rear: 18.4R38 |
Dimensions | |
|---|---|
Wheelbase | 104.4 inches
265 cm |
Terraglide Wheelbase | 104.8 inches
266 cm |
SuperSteer Wheelbase | 108.7 inches
276 cm |
Length | 178.4 inches
453 cm |
Width | 75.3 inches
191 cm |
Height | 115 inches
292 cm |
Shipping weight | 10890 lbs
4939 kg |
Max weight | 19180 lbs
8700 kg |
Photos
New Holland TS125A tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for New Holland TS125A based on its 116 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for New Holland TS125A.
Estimated Continuous Field Runtime: 11.1 hrs
Approximately 11.1 hours of continuous field operation at ~75% rated power on a full tank (67.1 gal / 254 L).
Estimated 75% Load Fuel Burn~6 gal/hr (22.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
New Holland TS125A Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for New Holland TS125A.
Converted Equivalents:
Horsepower (HP)116 hp
Kilowatts (kW)86.5 kW
Metric Horsepower (PS / CV)117.6 PS
Direct Competitor Comparison
Compare New Holland TS125A against same-era industry alternatives in the same horsepower class.
Current Model
New Holland
New Holland TS125A
Engine Power:Engine Detail — 410.6 ci / 6.7 L (listed): 116 hp / 86.5 kW
★ Baseline Reference
Related models
New Holland TK100
- Power:
- 93
- Production years:
- 2004 - 2009
New Holland TK4050
- Power:
- 93.9
- Production years:
- 2009 - 2017
New Holland 6810S
- Power:
- 95
- Production years:
- 1994 - 2003
New Holland 7610S
- Power:
- 95
- Production years:
- 1994 - 2003
New Holland 7635
- Power:
- 95
- Production years:
- 1996 - 1999