Oliver 1955

The Oliver 1955 is a tractor produced by Oliver. It is equipped with a 310 ci 5.1 L engine. The listed engine power is 108.16 hp 80.7 kW. Transmission: Hydraul-Shift. Operating weight: 11,250 lbs 5103 kg.

Engine Power
108.16 hp 80.7 kW
Fuel & Capacities
35 gal 132.5 L
Transmission
Hydraul-Shift
Operating Weight
11,250 lbs 5103 kg

Overview

Oliver 1955 tractor photo
1970 - 1974 55 SeriesRow-Crop tractor 55 Series Row-Crop tractor
Production
Manufacturer
Oliver (a part of White)
Row-Crop tractor
Original price was $14,250 in 1974
Oliver 1955 Engine
Oliver-Waukesha 5.1L 6-cyl diesel
Fuel tank
35 gal 132.5 L
Engine details ...
Oliver 1955 Power
PTO (claimed)
108 hp 80.5 kW
Drawbar (tested)
90.32 hp 67.4 kW
PTO (tested)
108.16 hp 80.7 kW
Performance test details ...
Mechanical
Two- or four-wheel drive
Power steering
Differential hydraulic dry disc brakes
Open operator station. Optional two-post ROPS and cab.
Hydraulics
Type
closed center
Pump flow
20 gpm 75.7 lpm
Tractor hitch
Rear Type
II/III
Rear lift
6000 lbs 2721 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
1000
Dimensions & Tires
2WD Wheelbase
103 inches 261 cm
4WD Wheelbase
86.25 inches 219 cm
Weight
11,250 lbs 5103 kg
Front tire
11L-15
Rear tire
20.8-38
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
1955 references literature
1755/1855/1955 published in 1970, by Oliver
1755/1855/1955 published in 1970, by White
A Modern Line-Up in Power published in 1969, by Oliver

Engine

Engine Detail — 310 ci / 5.1 L Diesel

Manufacturer
Oliver-Waukesha
Configuration
turbocharged diesel, 6-cylinder, liquid-cooled
Displacement
310 ci 5.1 L
Bore/Stroke
3.875x4.375 inches 98 x 111 mm
Air cleaner
dry
Rated RPM
2400
Starter volts
12
Coolant capacity
20 qts 18.9 L

Transmission

Transmission options
6-speed gear
18-speed partial power shift

Transmission — 6 forward and 2 reverse gear

Type
gear
Gears
6 forward and 2 reverse
Clutch
330mm cerametallic disc
With 18.4-38 rear tires.
1955  gear speeds

Transmission — Hydraul-Shift

Transmission
Hydraul-Shift
Type
partial power shift
Gears
18 forward and 6 reverse
Clutch
330mm cerametallic disc
The Hydraul-Shift overs a power shift between over-, under-, and direct-drive for each gear.
With 18.4-38 rear tires.
1955 Hydraul-Shift partial power shift speeds

Dimensions

Oliver 1955 Tires
Ag front
11L-15
Ag rear
20.8-38
Dimensions
2WD Wheelbase
103 inches 261 cm
4WD Wheelbase
86.25 inches 219 cm
2WD Length
159.5 inches 405 cm
4WD Length
152.375 inches 387 cm
Width
80.625 inches*Minimum width 204 cm
Height (steering wheel)
85.5 inches 217 cm
Operating weight
11,250 lbs 5103 kg
Ballasted weight
16,220 lbs 7357 kg
2WD Ground clearance
25.5 inches 64 cm
4WD Ground clearance
13.5 inches 34 cm
2WD Front tread
61.5 to 87.5 inches 156 to 222 cm
4WD Front tread
60/70.75/80 inches 152/179/203 cm
Rear tread
57 to 119.5 inches 144 to 303 cm

Tests

Nebraska Tractor Test 1055
Diesel 18-speed 2WD October 15 - 24, 1970 Link: Nebraska Tractor Test 1055 file
PTO performance
Power at rated engine speed
108.16 hp 80.7 kW
Fuel use
6.9 gal/hour 26.1 l/hour
Drawbar performance
Max power
90.32 hp 67.4 kW
Fuel use
7.0 gal/hour 26.5 l/hour
Gear 3-direct used for power test.
Max pull
12,639 lbs 5733 kg
Gear 2-under used for pull test.

Photos

Oliver 1955

Oliver 1955

Recommended Implements & Sizing Guide

Engineering recommendations for Oliver 1955 based on its 108.16 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Oliver 1955.

Estimated Continuous Field Runtime: 6.2 hrs

Approximately 6.2 hours of continuous field operation at ~75% rated power on a full tank (35 gal / 132.5 L).

Estimated 75% Load Fuel Burn~5.6 gal/hr (21.3 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Oliver 1955 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Oliver 1955.

Converted Equivalents:

Horsepower (HP)108.2 hp
Kilowatts (kW)80.7 kW
Metric Horsepower (PS / CV)109.7 PS

Direct Competitor Comparison

Compare Oliver 1955 against same-era industry alternatives in the same horsepower class.

Current Model
Oliver

Oliver 1955

Engine Power:108.16 hp 80.7 kW
★ Baseline Reference
FendtMarket Competitor

Fendt 210 Vario

Engine Power:97.9
Production Years:2010 - 2026
Massey FergusonMarket Competitor

Massey Ferguson 3455

Engine Power:98
Production Years:2005 - 2010
FordMarket Competitor

Ford 7910

Engine Power:98
Production Years:1985 - 1987
International HarvesterMarket Competitor

International Harvester A-766

Engine Power:98
Production Years:1972 - 1978