Schluter Super 1250
The Schluter Super 1250 is a tractor produced by Schluter. It is equipped with a 434.9 ci 7.1 L engine. The listed engine power is Engine Detail — 434.9 ci / 7.1 L (listed): 115 hp / 85.8 kW. Transmission: 12 forward and 6 reverse. Drive type: 4x2 2WD. Operating weight: 9,415 lbs (2WD) 4270 kg.
Engine Power
Engine Detail — 434.9 ci / 7.1 L (listed): 115 hp / 85.8 kW
Drive & Traction
4x2 2WD
Fuel & Capacities
33 gal
124.9 L
Transmission
12 forward and 6 reverse
Operating Weight
9,415 lbs (2WD)
4270 kg
Overview
 | 1968 - 1973 |
|---|
Production | |
|---|---|
Manufacturer | Schluter |
Schluter Super 1250 Engine | |
|---|---|
7.1L 6-cyl | |
Fuel tank | 33 gal
124.9 L |
68.7 gal
260.0 L | |
Engine details ...  | |
Schluter Super 1250 Transmission | |
|---|---|
12-speed | |
Transmission details ...  |
Schluter Super 1250 Power | |
|---|---|
Engine | 115 hp
85.8 kW |
Mechanical | |
|---|---|
Drive | 4x2 2WD |
4x4 MFWD 4WD optional | |
Steering | power assist |
Drum brakes | |
Hydraulics | |
|---|---|
Total flow | 7.7 gpm
29.1 lpm |
10 gpm
37.9 lpm | |
Tractor hitch | |
|---|---|
Rear lift | 7,056 lbs
3200 kg |
9,922 lbs (optional)
4500 kg | |
Power Take-off (PTO) | |
|---|---|
Rear PTO Type | 540/1000 |
Dimensions & Tires | |
|---|---|
Wheelbase | 103.5 inches
262 cm |
Weight | 9415 to 10319 pounds |
Front tire | 6.50-20 |
Rear tire | 16.9-34 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 434.9 ci / 7.1 L
Manufacturer | SDM 110 W 6 |
Configuration | 6-cylinder |
Displacement | 434.9 ci
7.1 L |
Bore/Stroke | 4.331x4.921 inches
110 x 125 mm |
Power | 115 hp
85.8 kW |
Rated RPM | 1800 |
Torque | 340.8 lb-ft
462.1 Nm |
Torque RPM | 1300 |
Transmission
Transmission — 12 forward and 6 reverse
Gears | 12 forward and 6 reverse |
Dimensions
Schluter Super 1250 Tires | |
|---|---|
Ag front | 6.50-20 (2WD) |
11.2-24 (4WD) | |
Ag rear | 16.9-34 |
Dimensions | |
|---|---|
Wheelbase | 103.5 inches
262 cm |
Length | 172.8 inches
438 cm |
Height | 98.8 inches
250 cm |
Weight | 9,415 lbs (2WD)
4270 kg |
10,319 lbs (4WD)
4680 kg | |
Recommended Implements & Sizing Guide
Engineering recommendations for Schluter Super 1250 based on its 115 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Schluter Super 1250.
Estimated Continuous Field Runtime: 5.5 hrs
Approximately 5.5 hours of continuous field operation at ~75% rated power on a full tank (33 gal / 124.9 L).
Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Schluter Super 1250 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Schluter Super 1250.
Converted Equivalents:
Horsepower (HP)115 hp
Kilowatts (kW)85.8 kW
Metric Horsepower (PS / CV)116.6 PS
Direct Competitor Comparison
Compare Schluter Super 1250 against same-era industry alternatives in the same horsepower class.
Current Model
Schluter
Schluter Super 1250
Engine Power:Engine Detail — 434.9 ci / 7.1 L (listed): 115 hp / 85.8 kW
★ Baseline Reference
Related models
Schluter Compact 950 V 6
- Power:
- 95
- Production years:
- 1990 - 1993
Schluter Compact 950T
- Power:
- 95
- Production years:
- 1971 - 1974
Schluter Super 950
- Power:
- 95
- Production years:
- 1971 - 1974
Schluter Compact 1050T
- Power:
- 100
- Production years:
- 1974 - 1981
Schluter Super 1050
- Power:
- 100
- Production years:
- 1974 - 1976