TractorData Logo
TractorData

Valmet 1102

The Valmet 1102 is a tractor produced by Valmet. It is equipped with a 255.1 ci 4.2 L engine. The listed engine power is Diesel (listed): 115 hp / 85.8 kW. Transmission: Hi-Trac. Operating weight: 8598 to 10340 pounds.

Engine Power
Diesel (listed): 115 hp / 85.8 kW
Fuel & Capacities
23.78 gal 90.0 L
Transmission
Hi-Trac
Operating Weight
8598 to 10340 pounds

Overview

No photo available
1973 - 1980 02 SeriesRow-Crop tractor 02 Series Row-Crop tractor
Production
Manufacturer
Valmet
Row-Crop tractor
Variants
1102
8-speed
1103
16-speed
Valmet 1102 Engine
Valmet 4.2L 4-cyl diesel
Fuel tank
23.78 gal 90.0 L
Engine details ...
Valmet 1102 Power
Engine
115 hp 85.8 kW
Mechanical
Two- or four-wheel drive
Power steering
Hydraulics
Pump flow
9.51 gpm 36.0 lpm
Tractor hitch
Rear lift
6614 lbs 3000 kg
Power Take-off (PTO)
Rear PTO Type
540/1000
Dimensions & Tires
Wheelbase
90.94 inches 230 cm
Weight
8598 to 10340 pounds
Front tire
9.00-20
Rear tire
18.4-34
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
References
1102 references literature
J60 - J71 - J81 published in 1980, by Valtra

Engine

Engine Detail — 255.1 ci / 4.2 L Diesel

Manufacturer
Valmet 411 BS
Configuration
turbocharged diesel, 4-cylinder, liquid-cooled
Displacement
255.1 ci 4.2 L
Bore/Stroke
4.252x4.488 inches 108 x 114 mm
Power
115 hp 85.8 kW
Rated RPM
2300
Torque
259.6 lb-ft 352.0 Nm
Torque RPM
1500
Starter volts
12

Transmission

Transmission options
8-speed
16-speed

Transmission — 8 forward and 2 reverse

Gears
8 forward and 2 reverse
Four gears (1-4) plus reverse (R) in two ranges (low/high).
1102 speeds

Transmission — Hi-Trac

Transmission
Hi-Trac
Gears
16 forward and 4 reverse

Dimensions

Valmet 1102 Tires
Ag front
9.00-20
14.9-24 (4WD)
Ag rear
18.4-34
Dimensions
Wheelbase
90.94 inches 230 cm
Length
164.2 inches 417 cm
Height
106.3 inches 270 cm
2WD Weight
8,598 lbs 3900 kg
4WD Weight
10340 lbs 4690 kg

Recommended Implements & Sizing Guide

Engineering recommendations for Valmet 1102 based on its 115 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)Heavy DutyHeavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing
10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼Heavy DutyWide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep
90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机Commercial / Field ScaleDeep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage
10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙Heavy DutyAggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage
5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机Heavy DutyHigh density baling; requires minimum 85 PTO HP.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Valmet 1102.

Estimated Continuous Field Runtime: 4 hrs

Approximately 4 hours of continuous field operation at ~75% rated power on a full tank (23.8 gal / 90 L).

Estimated 75% Load Fuel Burn~6 gal/hr (22.6 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Valmet 1102 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Valmet 1102.

Converted Equivalents:

Horsepower (HP)115 hp
Kilowatts (kW)85.8 kW
Metric Horsepower (PS / CV)116.6 PS

Direct Competitor Comparison

Compare Valmet 1102 against same-era industry alternatives in the same horsepower class.

Current Model
Valmet

Valmet 1102

Engine Power:Diesel (listed): 115 hp / 85.8 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota M105D

Engine Power:103.5
Production Years:2005 - 2008
View Full Specs→
CaseIHMarket Competitor

CaseIH CS 110

Engine Power:103.6
Production Years:1997 - 2003
View Full Specs→
Massey FergusonMarket Competitor

Massey Ferguson 5450

Engine Power:103.7
Production Years:2011 - 2013
View Full Specs→
ClaasMarket Competitor

Claas 556

Engine Power:104
Production Years:2003 - 2005
View Full Specs→

Related models