Yanmar YM195
The Yanmar YM195 is a tractor produced by Yanmar. It is equipped with a 60.8 ci 1.0 L engine. The listed engine power is Diesel (listed): 19 hp / 14.2 kW. Transmission: 8 forward and 2 reverse. Operating weight: 1620 to 1830 pounds.
Engine Power
Diesel (listed): 19 hp / 14.2 kW
Fuel & Capacities
5.8 gal
22.0 L
Transmission
8 forward and 2 reverse
Operating Weight
1620 to 1830 pounds
Overview
 | 1977 - 1979
Compact Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Yanmar |
Compact Utility tractor | |
Original price was $5,400 in 1979 | |
Variants | |
|---|---|
YM195 | 2WD |
YM195D | 4WD |
Yanmar YM195 Engine | |
|---|---|
Yanmar 1.0L 2-cyl diesel | |
Engine details ...  |
Yanmar YM195 Transmission | |
|---|---|
8-speed gear | |
Transmission details ...  |
Yanmar YM195 Power | |
|---|---|
Engine | 19 hp
14.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Mechanical drum brakes | |
Open operator station. |
Capacity | |
|---|---|
Fuel | 5.8 gal
22.0 L |
Hydraulic system | 4 gal
15.1 L |
Hydraulics | |
|---|---|
Type | open center |
Capacity | 4 gal
15.1 L |
Pressure | 2204 psi
152.0 bar |
Tractor hitch | |
|---|---|
Rear Type | I |
Power Take-off (PTO) | |
|---|---|
Rear PTO | transmission |
Rear PTO Type | 540/1000 |
Engine RPM | 540@2200 |
1000@2200 | |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 58.7 inches
149 cm |
4WD Wheelbase | 61.3 inches
155 cm |
Weight | 1620 to 1830 pounds |
Front tire | 4.00-12 |
2WD Rear tire | 8.3/8-24 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
Charging amps | 12 |
Battery volts | 12 |
Engine
Engine Detail — 60.8 ci / 1.0 L Diesel
Manufacturer | Yanmar 2T84A |
Fuel Type | Diesel |
Configuration | 2-cylinder, liquid-cooled |
Displacement | 60.8 ci
1.0 L |
Bore/Stroke | 3.31x3.54 inches
84 x 90 mm |
Power | 19 hp
14.2 kW |
Compression | 20.5:1 |
Rated RPM | 2400 |
Firing order | 1-2 |
Starter volts | 12 |
Oil capacity | 5.3 qts
5.0 L |
Coolant capacity | 4.4 qts
4.2 L |
Transmission
Transmission — 8 forward and 2 reverse gear
Type | gear |
Gears | 8 forward and 2 reverse |
Clutch | dry disc |
Oil capacity | 16 qts
15.1 L |
Four gears, plus reverse, in two ranges. Tractor must be stopped, and clutch used, to shift gears or range. | |
With 8.3/8-24 rear tires. | |
 | |
Dimensions
Yanmar YM195 Tires | |
|---|---|
2WD Standard tires (ag) | Front: 4.00-12. Rear: 8.3/8-24 |
4WD Standard tires (ag) | Front: 5-14. Rear: 8.3/8-24 |
2WD Optional tires (ag) | Front: 4.00-15. Rear: 9.5/9-24 |
4WD Optional tires (ag) | Front: 5-14. Rear: 9.5/9-24 |
2WD Lawn/turf front | 20x8.00-10 |
4WD Lawn/turf front | 23x8.50-12 |
Lawn/turf rear | 13.6-16 |
Dimensions | |
|---|---|
2WD Wheelbase | 58.7 inches
149 cm |
4WD Wheelbase | 61.3 inches
155 cm |
Length | 111.2 inches
282 cm |
Width | 47.6 inches
120 cm |
2WD Shipping weight | 1620 lbs
734 kg |
4WD Shipping weight | 1830 lbs
830 kg |
Clearance (rear axle) | 12.8 inches
32 cm |
Clearance (drawbar) | 9.8 inches
24 cm |
Yanmar YM195 Height | |
|---|---|
2WD Steering wheel | 52.7 inches
133 cm |
4WD Steering wheel | 52.6 inches
133 cm |
2WD Exhaust | 71.3 inches
181 cm |
4WD Exhaust | 72.2 inches
183 cm |
Photos
Yanmar YM195 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Yanmar YM195 based on its 19 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 4 ft (48 in)1.2 m | Light Duty | Pasture clipping and light brush under 1" diameter. |
Rotary TillerSeedbed Prep | 42 to 48 in105 - 120 cm | Light Duty | Covers compact tractor tire width. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Yanmar YM195.
Estimated Continuous Field Runtime: 5.9 hrs
Approximately 5.9 hours of continuous field operation at ~75% rated power on a full tank (5.8 gal / 22 L).
Estimated 75% Load Fuel Burn~1 gal/hr (3.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Yanmar YM195 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Yanmar YM195.
Converted Equivalents:
Horsepower (HP)19 hp
Kilowatts (kW)14.2 kW
Metric Horsepower (PS / CV)19.3 PS
Direct Competitor Comparison
Compare Yanmar YM195 against same-era industry alternatives in the same horsepower class.
Current Model
Yanmar
Yanmar YM195
Engine Power:Diesel (listed): 19 hp / 14.2 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 8-16
Engine Power:17.8
Production Years:1917 - 1922
Related models
Yanmar AC-16
- Power:
- 15.5
- Production years:
- 2004 - 2007
Yanmar F-6
- Power:
- 15.5
- Production years:
- 1989 - 1992
Yanmar F145
- Power:
- 15.6
- Production years:
- 1983 - 1987
Yanmar AF-16
- Power:
- 15.8
- Production years:
- 1992 - 1996
Yanmar AF-160
- Power:
- 15.8
- Production years:
- 1997 - 2000