Zetor Forterra 11441

The Zetor Forterra 11441 is a tractor produced by Zetor. It is equipped with a 253.6 ci 4.2 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: 24 forward and 18 reverse. Operating weight: 10179 lbs 4617 kg.

Engine Power

Diesel (listed): 110 hp / 82.0 kW

Fuel & Capacities

47.6 gal 180.2 L

Transmission

24 forward and 18 reverse

Operating Weight

10179 lbs 4617 kg

Overview

	2002 - 2009 Model year 2002-20072007-2009 Forterra Series

Production
Manufacturer	Zetor
Built in Brno, Czechoslovakia

Zetor 11441 Engine
Zetor 4.2L 4-cyl diesel
Fuel tank	47.6 gal 180.2 L
Engine details ...

Zetor 11441 Transmission
24-speed synchronized
Transmission details ...

Zetor 11441 Power
Engine	110 hp 82.0 kW

Mechanical
Four-wheel drive
Final drives	planetary
Power steering
Hydraulic wet disc brakes
Trailer brakes	hydraulic OptOptional
	pneumatic OptOptional
Cab standard with available air-conditioning.

Hydraulics
Pump flow	15.85 gpm 60.0 lpm
	18.5 gpmOptOptional 70.0 lpm

Tractor hitch
Control	position control and lower-link draft sensing
Rear lift	13150 lbs 5964 kg

Power Take-off (PTO)
Rear PTO	independent
Clutch	wet disc
Rear PTO Type	540/1000
	750/1000 OptOptional

Dimensions & Tires
Wheelbase	94.1 inches 239 cm
Weight	10179 lbs 4617 kg
Front tire	14.9-24
Rear tire	18.4-38
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

Engine

Engine Detail — 253.6 ci / 4.2 L Diesel

Manufacturer	Zetor Z 1403
Configuration	turbocharged diesel, 4-cylinder, liquid-cooled
Displacement	253.6 ci 4.2 L
Bore/Stroke	4.13x4.72 inches 105 x 120 mm
Power	110 hp 82.0 kW
Rated RPM	2200
Torque	354 lb-ft 480.0 Nm
Torque RPM	1550
Starter	electric
Starter volts	12

Transmission

Transmission — 24 forward and 18 reverse synchronized

Type	synchronized
Gears	24 forward and 18 reverse
Clutch	hydraulic dry disc

Dimensions

Zetor 11441 Tires
Standard tires (ag)	Front: 14.9-24. Rear: 18.4-38

Dimensions
Wheelbase	94.1 inches 239 cm
Length	195.9 inches 497 cm
Width	86.3 inches 219 cm
Height	111.3 inches 282 cm
Weight	10179 lbs 4617 kg
Ground clearance	18.3 inches 46 cm

Photos

1997 Zetor 11441 with Traclift front-end loader.

Recommended Implements & Sizing Guide

Engineering recommendations for Zetor Forterra 11441 based on its 110 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Zetor Forterra 11441.

Estimated Continuous Field Runtime: 8.3 hrs

Approximately 8.3 hours of continuous field operation at ~75% rated power on a full tank (47.6 gal / 180.2 L).

Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours