CaseIH JX1075N
The CaseIH JX1075N is a tractor produced by Caseih. It is equipped with a 179 ci 2.9 L engine. The listed engine power is Diesel (gross): 75 hp / 55.9 kW. Transmission: 16 forward and reverse. Operating weight: 5027 to 5886 pounds.
Engine Power
Diesel (gross): 75 hp / 55.9 kW
Fuel & Capacities
15 gal
56.8 L
Transmission
16 forward and reverse
Operating Weight
5027 to 5886 pounds
Overview
 | 2005 - 2008
JXN SeriesOrchard/Vineyard tractor
JXN Series
Orchard/Vineyard tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Orchard/Vineyard tractor | |
CaseIH JX1075N Engine | |
|---|---|
Case IH 2.9L 3-cyl diesel | |
Fuel tank | 15 gal
56.8 L |
Engine details ...  | |
CaseIH JX1075N Transmission | |
|---|---|
16-speed mechanical shuttle | |
Transmission details ...  |
CaseIH JX1075N Power | |
|---|---|
Engine (gross) | 75 hp
55.9 kW |
PTO (claimed) | 62 hp
46.2 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Two-post mid-mount foldable ROPS. Cab optional. |
Hydraulics | |
|---|---|
Type | open center |
Pressure | 2610 psi
180.0 bar |
Rear valves | 2 |
2WD Pump flow | 12.4 gpm
46.9 lpm |
4WD Pump flow | 16.9 gpm
64.0 lpm |
2WD Total flow | 18.9 gpm
71.5 lpm |
4WD Total flow | 23.4 gpm
88.6 lpm |
Steering flow | 6.5 gpm
24.6 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Control | mechanical lower-link draft sensing |
Rear lift | 3962 lbs
1797 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Clutch | mechanical dry disc |
Rear PTO Type | 540 |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 80.1 inches
203 cm |
4WD Wheelbase | 81.1 inches
205 cm |
Weight | 5027 to 5886 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging system | alternator |
ROPS Charging amps | 45 |
Cab Charging amps | 65 |
Battery CCA | 730 |
Battery volts | 12 |
Engine
Engine Detail — 179 ci / 2.9 L Diesel
Manufacturer | Case IH |
Configuration | turbocharged diesel, 3-cylinder, liquid-cooled |
Displacement | 179 ci
2.9 L |
Bore/Stroke | 3.88x5.06 inches
99 x 129 mm |
Emissions | Tier II |
Power (gross) | 75 hp
55.9 kW |
Fuel system | mechanical direct injection |
Rated RPM | 2300 |
Torque | 221 lb-ft
299.7 Nm |
Torque RPM | 1400 |
Starter volts | 12 |
Transmission
Transmission — 16 forward and reverse mechanical shuttle
Type | mechanical shuttle |
Gears | 16 forward and reverse |
Four synchronized gears in four ranges with mechanical shuttle. | |
Dimensions
CaseIH JX1075N Tires |
|---|
Dimensions | |
|---|---|
2WD Wheelbase | 80.1 inches
203 cm |
4WD Wheelbase | 81.1 inches
205 cm |
2WD Length | 152 inches
386 cm |
4WD Length | 153.5 inches
389 cm |
2WD Width | 52.9 inches
134 cm |
4WD Width | 53.4 inches
135 cm |
Ground clearance | 10.5 inches
26 cm |
CaseIH JX1075N Weight | |
|---|---|
2WD ROPS | 5027 lbs
2280 kg |
2WD Cab | 5335 lbs
2419 kg |
4WD ROPS | 5560 lbs
2522 kg |
4WD Cab | 5886 lbs
2669 kg |
Max front axle | 3527 lbs
1599 kg |
Max rear axle | 6614 lbs
3000 kg |
CaseIH JX1075N Height | |
|---|---|
Hood | 51 inches
129 cm |
ROPS | 87 inches
220 cm |
Cab | 90.7 inches
230 cm |
Photos
CaseIH JX1075N tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih JX1075N based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih JX1075N.
Estimated Continuous Field Runtime: 3.8 hrs
Approximately 3.8 hours of continuous field operation at ~75% rated power on a full tank (15 gal / 56.8 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih JX1075N Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih JX1075N.
Converted Equivalents:
Horsepower (HP)75 hp
Kilowatts (kW)55.9 kW
Metric Horsepower (PS / CV)76 PS
Direct Competitor Comparison
Compare CaseIH JX1075N against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH JX1075N
Engine Power:Diesel (gross): 75 hp / 55.9 kW
★ Baseline Reference
Related models
CaseIH 3230
- Power:
- 60
- Production years:
- 1994 - 1997
CaseIH 585
- Power:
- 60
- Production years:
- 1985 - 1990
CaseIH 585XL
- Power:
- 60
- Production years:
- 1985 - 1990
CaseIH 595
- Power:
- 60
- Production years:
- 1991 - 1994
CaseIH DX60
- Power:
- 60
- Production years:
- 2007 - 2008