CaseIH PJ75
The CaseIH PJ75 is a tractor produced by Caseih. It is equipped with a 244.1 ci 4.0 L engine. The listed engine power is Diesel (listed): 75 hp / 55.9 kW. Transmission: 24 forward and reverse. Operating weight: 5677 lbs 2575 kg.
Engine Power
Diesel (listed): 75 hp / 55.9 kW
Fuel & Capacities
15.85 gal
60.0 L
Transmission
24 forward and reverse
Operating Weight
5677 lbs
2575 kg
Overview
 | 2001 - 2004
PJ SeriesUtility tractor
PJ Series
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | CaseIH |
Utility tractor | |
Variants | |
|---|---|
PJ75 | utility |
PJN75 | orchard |
PJV75 | vineyard |
CaseIH PJ75 Engine | |
|---|---|
4.0L 4-cyl diesel | |
Fuel tank | 15.85 gal
60.0 L |
Engine details ...  | |
CaseIH PJ75 Power | |
|---|---|
Engine | 75 hp
55.9 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Steering | hydrostatic power |
Four-post ROPS. | |
Hydraulics | |
|---|---|
Valves | 3 *Optional. |
Pump flow | 10.41 gpm
39.4 lpm |
Steering flow | 5.2 gpm
19.7 lpm |
Tractor hitch | |
|---|---|
Rear Type | I |
Control | top-link draft sensing |
Rear lift (at ends) | 5291 lbs
2399 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 83.1 inches
211 cm |
4WD Wheelbase | 87.6 inches
222 cm |
Weight | 5677 lbs
2575 kg |
Rear tire | 380/70R28 |
Full dimensions and tires ...  | |
References | |
|---|---|
 | |
PJ Series published in 2001, by CaseIH |
Engine
Engine Detail — 244.1 ci / 4.0 L Diesel
Fuel Type | Diesel |
Configuration | 4-cylinder, air-cooled |
Displacement | 244.1 ci
4.0 L |
Emissions | Tier I |
Power | 75 hp
55.9 kW |
Rated RPM | 2350 |
Torque | 203.6 lb-ft
276.1 Nm |
Torque RPM | 1400 |
Starter type | electric |
Transmission
Transmission options | |
|---|---|
12-speed synchromesh | |
24-speed | |
24-speed two-speed power shift |
Transmission — 12 forward and reverse synchromesh
Type | synchromesh |
Gears | 12 forward and reverse |
Transmission — 24 forward and reverse
Gears | 24 forward and reverse |
Transmission — 24 forward and reverse two-speed power shift
Type | two-speed power shift |
Gears | 24 forward and reverse |
Dimensions
CaseIH PJ75 Tires | |
|---|---|
Ag rear | 380/70R28 |
Dimensions | |
|---|---|
2WD Wheelbase | 83.1 inches
211 cm |
4WD Wheelbase | 87.6 inches
222 cm |
2WD Length | 150.1 inches
381 cm |
4WD Length | 149.9 inches
380 cm |
Width | 69.8 inches*Minimum.
177 cm |
Height (ROPS) | 84.2 inches
213 cm |
4WD Weight | 5677 lbs
2575 kg |
Ground clearance | 11.1 inches
28 cm |
Photos
CaseIH PJ75 tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Caseih PJ75 based on its 75 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Caseih PJ75.
Estimated Continuous Field Runtime: 4.1 hrs
Approximately 4.1 hours of continuous field operation at ~75% rated power on a full tank (15.8 gal / 60 L).
Estimated 75% Load Fuel Burn~3.9 gal/hr (14.8 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Caseih PJ75 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Caseih PJ75.
Converted Equivalents:
Horsepower (HP)75 hp
Kilowatts (kW)55.9 kW
Metric Horsepower (PS / CV)76 PS
Direct Competitor Comparison
Compare CaseIH PJ75 against same-era industry alternatives in the same horsepower class.
Current Model
Caseih
CaseIH PJ75
Engine Power:Diesel (listed): 75 hp / 55.9 kW
★ Baseline Reference
Related models
CaseIH 3230
- Power:
- 60
- Production years:
- 1994 - 1997
CaseIH 585
- Power:
- 60
- Production years:
- 1985 - 1990
CaseIH 585XL
- Power:
- 60
- Production years:
- 1985 - 1990
CaseIH 595
- Power:
- 60
- Production years:
- 1991 - 1994
CaseIH DX60
- Power:
- 60
- Production years:
- 2007 - 2008