Craftsman 247.28881

The Craftsman 247.28881 is a tractor produced by Craftsman Lawn Tractors. The listed engine power is Gasoline (gross): 17.5 hp / 13.0 kW. Transmission: MTD Transmatic.

Engine Power

Gasoline (gross): 17.5 hp / 13.0 kW

Fuel & Capacities

1.5 gal 5.7 L

Transmission

MTD Transmatic

Overview

	2011 - 2012 LT 1500 SeriesLawn tractorMTD built LT 1500 Series Lawn tractor MTD built

Production
Distributor	Craftsman (a part of Sears)
Manufacturer	MTD
Lawn tractor
Original price	$1,050 (2012)

Variants
247.28883	California emissions

Craftsman 247.28881 Engine
17.5HP Briggs & Stratton 1-cyl gasoline
Fuel tank	1.5 gal 5.7 L
Engine details ...

Craftsman 247.28881 Transmission
7-speed gear
Transmission details ...

Mechanical
Two-wheel drive
Steering	manual
Disc brakes
Open operator station. Low-back seat with single adjustment point.

Dimensions & Tires
Rear tire	20x8x8
Full dimensions and tires ...

Electrical
Ground	negative
Battery volts	12

References

2011 Customer Buying Guide published by Sears
2012 Customer Buying Guide published by Sears

Engine

Engine Detail — Gasoline

Fuel Type	Gasoline
Configuration	1-cylinder, air-cooled
Briggs & Stratton Silver 31C707
Power (gross)	17.5 hp 13.0 kW
Starter	electric
Starter volts	12
Sparkplug	Champion RC12YC
Sparkplug gap	0.030 inches 0.762 mm

Transmission

Transmission — MTD Transmatic

Transmission	MTD Transmatic
Type	gear
Gears	7 forward and reverse
Seven-position speed lever and forward-reverse lever. Gears may be shifted on the move using the clutch/brake pedal depressed part way. Tractor must be stopped to shift change direction.

Dimensions

Craftsman 247.28881 Tires
Lawn/turf rear	20x8x8

Dimensions

Attachments

42" Mower deck
Type	mid-mount Craftsman
	2-blade
Cutting width	42 inches 106 cm
Cut height	1.5 to 4 inch 3 to 10 cm
Cut positions	5

Photos

Craftsman 247.28881 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Craftsman Lawn Tractors Craftsman 247.28881 based on its 17.5 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	1 to 2 Bottom (12")1 - 2 铧 (30 cm)	Light Duty	Ideal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing	4 ft (48 in)1.2 m	Light Duty	Pasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep	42 to 48 in105 - 120 cm	Light Duty	Covers compact tractor tire width.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Craftsman Lawn Tractors Craftsman 247.28881.

Estimated Continuous Field Runtime: 1.6 hrs

Approximately 1.6 hours of continuous field operation at ~75% rated power on a full tank (1.5 gal / 5.7 L).

Estimated 75% Load Fuel Burn~0.9 gal/hr (3.4 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours

Craftsman Lawn Tractors Craftsman 247.28881 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Craftsman Lawn Tractors Craftsman 247.28881.

Enter value:

Unit:

Converted Equivalents:

Horsepower (HP)17.5 hp

Kilowatts (kW)13 kW

Metric Horsepower (PS / CV)17.7 PS

Direct Competitor Comparison

Compare Craftsman 247.28881 against same-era industry alternatives in the same horsepower class.

Current Model

Craftsman Lawn Tractors