Cub Cadet i1050
The Cub Cadet i1050 is a tractor produced by Cub Cadet Lawn Tractors. It is equipped with a 725 cc 44.24 ci engine. The listed engine power is Gasoline (gross): 25 hp / 18.6 kW. Transmission: Hydro-Gear EZT. Operating weight: 590 lbs*With mower deck 267 kg.
Engine Power
Gasoline (gross): 25 hp / 18.6 kW
Fuel & Capacities
2.8 gal
10.6 L
Transmission
Hydro-Gear EZT
Operating Weight
590 lbs*With mower deck
267 kg
Overview
 | 2007 - 2009
iSeries SeriesZero-turn mower
iSeries Series
Zero-turn mower |
|---|
Production | |
|---|---|
Manufacturer | Cub Cadet (a part of MTD) |
Zero-turn mower | |
Original price was $3,900 in 2007 | |
Cub Cadet i1050 Engine | |
|---|---|
25HP Kohler 725cc 2-cyl gasoline | |
Fuel tank | 2.8 gal
10.6 L |
Engine details ...  | |
Cub Cadet i1050 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Steering | differential |
Dry disc brakes | |
Open operator station. | |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | electric |
Dimensions & Tires | |
|---|---|
Wheelbase | 47.5 inches
120 cm |
Weight | 590 lbs
267 kg |
Front tire | 15x6 |
Rear tire | 20x8 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Charging amps | 15 |
Battery CCA | 235 |
Battery volts | 12 |
References | |
|---|---|
 | |
Better Residential Outdoor Power Equipment published in 2007, by Cub Cadet | |
iSeries Zero-Turn Tractors published in 2008, by Cub Cadet |
Engine
Engine Detail — 725 cc / 44.24 ci Gasoline
Manufacturer | Kohler SV730 |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled vertical-shaft V-twin |
Displacement | 725 cc
44.24 ci |
Bore/Stroke | 3.27x2.64 inches
83 x 67 mm |
Power (gross) | 25 hp
18.6 kW |
Starter | electric |
Starter volts | 12 |
Oil capacity | 1.6 qts
1.5 L |
Transmission
Transmission — Hydro-Gear EZT
Transmission | Hydro-Gear EZT |
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
 | |
i1050 Transmission Controls | |
|---|---|
 | |
1 | Brake |
2 | Throttle |
3 | Forward |
4 | Reverse |
5 | Parking brake |
Dimensions
Cub Cadet i1050 Tires | |
|---|---|
Lawn/turf front | 15x6 |
Lawn/turf rear | 20x8 |
Dimensions | |
|---|---|
Wheelbase | 47.5 inches
120 cm |
Length | 69 inches
175 cm |
Weight | 590 lbs*With mower deck
267 kg |
Attachments
Attachment overview | |
|---|---|
50" mid-mount mower deck | |
Snowblower | |
Blade | |
Rear bagger kit for the 50-inch deck was model number 19A-101-100. |
50" Mower deck | |
|---|---|
Type | mid-mount Cub Cadet |
3-blade | |
Cutting width | 50 inches
127 cm |
Cut height | 1.25 to 3.75 inch
3 to 9 cm |
Cut positions | 6 |
Photos
Cub Cadet i1050
Cub Cadet i1050 operator station and controls.
Recommended Implements & Sizing Guide
Engineering recommendations for Cub Cadet Lawn Tractors Cub Cadet i1050 based on its 25 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Cub Cadet Lawn Tractors Cub Cadet i1050.
Estimated Continuous Field Runtime: 2.2 hrs
Approximately 2.2 hours of continuous field operation at ~75% rated power on a full tank (2.8 gal / 10.6 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Cub Cadet Lawn Tractors Cub Cadet i1050 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Cub Cadet Lawn Tractors Cub Cadet i1050.
Converted Equivalents:
Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS
Direct Competitor Comparison
Compare Cub Cadet i1050 against same-era industry alternatives in the same horsepower class.
Current Model
Cub Cadet Lawn Tractors
Cub Cadet i1050
Engine Power:Gasoline (gross): 25 hp / 18.6 kW
★ Baseline Reference
Related models
Cub Cadet lawn tractors 2072
- Power:
- 20
- Production years:
- 1987 - 1989
Cub Cadet lawn tractors 2082
- Power:
- 20
- Production years:
- 1990 - 1993
Cub Cadet lawn tractors 2084
- Power:
- 20
- Production years:
- 1993 - 1994
Cub Cadet lawn tractors 2086
- Power:
- 20
- Production years:
- 1996 - 1997
Cub Cadet lawn tractors 2206
- Power:
- 20
- Production years:
- 2000 - 2002