Deutz-Allis 6240

The Deutz-Allis 6240 is a tractor produced by Deutz Allis. It is equipped with a 172.5 ci 2.8 L engine. The listed engine power is Diesel (listed): 46 hp / 34.3 kW. Transmission: Dual-Split. Operating weight: 5776 to 6173 pounds.

Engine Power
Diesel (listed): 46 hp / 34.3 kW
Fuel & Capacities
20 gal 75.7 L
Transmission
Dual-Split
Operating Weight
5776 to 6173 pounds

Overview

Deutz-Allis 6240 tractor photo
1986 - 1990 6200 SeriesUtility tractor 6200 Series Utility tractor
Production
Manufacturer
Deutz-Allis
Utility tractor
Built in Germany
Original price
$18,100
Variants
DX 3.10
similar Deutz-Fahr model
Deutz-Allis 6240 Engine
Deutz 2.8L 3-cyl diesel
Engine details ...
Deutz-Allis 6240 Power
Engine
46 hp 34.3 kW
PTO (claimed)
43 hp 32.1 kW
Mechanical
Two- or four-wheel drive
Differential lock
mechanical rear
Power steering
Mechanical drum brakes
Four-post ROPS
Capacity
Fuel
20 gal 75.7 L
Hydraulic system
4 gal 15.1 L
7.5 galOptOptional 28.4 L
Hydraulics
Type
open center
Capacity
4 gal 15.1 L
7.5 galOptOptional 28.4 L
Pressure
2538 psi 175.0 bar
Valves
1 to 3
Pump flow
9.8 gpm 37.1 lpm
Tractor hitch
Rear Type
I
Rear lift (at ends)
4189 lbs 1900 kg
Front Hitch
II
Front lift
2205 lbs 1000 kg
Power Take-off (PTO)
Rear PTO
independent
Rear PTO Type
540 (1.375)
Front PTO
independent
Front PTO Type
1000
Dimensions & Tires
2WD Wheelbase
79 inches 200 cm
4WD Wheelbase
82 inches 208 cm
Weight
5776 to 6173 pounds
Front tire
7.50-16
2WD Rear tire
14.9-28
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery volts
12
References
6240 references literature
6240/6250/6260 published in 1985, by Deutz-Allis

Engine

Engine Detail — 172.5 ci / 2.8 L Diesel

Manufacturer
Deutz F3L 912
Fuel Type
Diesel
Configuration
3-cylinder, air-cooled
Displacement
172.5 ci 2.8 L
Bore/Stroke
3.94x4.72 inches 100 x 120 mm
Power
46 hp 34.3 kW
Rated RPM
2150
Starter volts
12
Oil capacity
8.5 qts 8.0 L

Transmission

Transmission options
8-speed partially synchronized
16-speed two-speed power shift

Transmission — 8 forward and 4 reverse partially synchronized

Type
partially synchronized
Gears
8 forward and 4 reverse
Clutch
dry disc
Four synchronized gears (1-4) in two ranges, plus reverse range.

Transmission — Dual-Split

Transmission
Dual-Split
Type
two-speed power shift
Gears
16 forward and 8 reverse

Dimensions

Deutz-Allis 6240 Tires
2WD Standard tires (ag)
Front: 7.50-16. Rear: 14.9-28
4WD Standard tires (ag)
Front: 10.5-20. Rear: 14.9-28
2WD Optional tires (ag)
Front: 7.50-16. Rear: 14.9-24
Dimensions
2WD Wheelbase
79 inches 200 cm
4WD Wheelbase
82 inches 208 cm
Width
82.3 inches 209 cm
Height (ROPS)
88.5 inches 224 cm
2WD Weight
5776 lbs 2619 kg
4WD Weight
6173 lbs 2800 kg
Rear tread
59 to 75 inches 149 to 190 cm

Photos

Deutz-Allis 6240

Deutz-Allis 6240

Deutz-Allis 6240

Deutz-Allis 6240

Recommended Implements & Sizing Guide

Engineering recommendations for Deutz Allis Deutz-Allis 6240 based on its 46 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
2 to 3 Bottom (14-16")2 - 3 铧 (35-40 cm)Medium DutyStandard utility farm tillage.
Rotary Cutter / MowerMowing & Clearing
6 ft (72 in)1.8 mMedium DutyMedium pasture clearing; rear slip-clutch recommended.
Rotary TillerSeedbed Prep
66 to 72 in165 - 180 cmMedium DutyStandard utility tiller; slip clutch protection required.
Disc HarrowSecondary Tillage
7 to 8 ft Tandem Disc2.1 - 2.4 m 对开双排耙Medium DutyField leveling and clod breaking behind plows.
Hay BalerHay & Forage
Small Square Baler (14x18")小方捆打捆机 (36x46 cm)Medium DutyClassic 2-string baler for horse and small livestock hay.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Allis Deutz-Allis 6240.

Estimated Continuous Field Runtime: 8.4 hrs

Approximately 8.4 hours of continuous field operation at ~75% rated power on a full tank (20 gal / 75.7 L).

Estimated 75% Load Fuel Burn~2.4 gal/hr (9.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Deutz Allis Deutz-Allis 6240 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Allis Deutz-Allis 6240.

Converted Equivalents:

Horsepower (HP)46 hp
Kilowatts (kW)34.3 kW
Metric Horsepower (PS / CV)46.6 PS

Direct Competitor Comparison

Compare Deutz-Allis 6240 against same-era industry alternatives in the same horsepower class.

Current Model
Deutz Allis

Deutz-Allis 6240

Engine Power:Diesel (listed): 46 hp / 34.3 kW
★ Baseline Reference
DeereMarket Competitor

Deere 1445F

Engine Power:41.4
Production Years:1987 - 1990
KubotaMarket Competitor

Kubota GL417

Engine Power:41.4
Production Years:1996 - 2001
Massey FergusonMarket Competitor

Massey Ferguson 1742

Engine Power:41.6
Production Years:2013 - 2018
Deutz-FahrMarket Competitor

Deutz-Fahr Agrokid 45

Engine Power:41.6
Production Years:1997 - 2002