Deutz-Fahr 4085E
The Deutz-Fahr 4085E is a tractor produced by Deutz Fahr. It is equipped with a 183.1 ci 3.0 L engine. The listed engine power is Diesel (listed): 80.9 hp / 60.3 kW. Transmission: 30 forward and 15 reverse. Operating weight: 5952 to 6945 pounds.
Engine Power
Diesel (listed): 80.9 hp / 60.3 kW
Fuel & Capacities
18.5 gal
70.0 L
Transmission
30 forward and 15 reverse
Operating Weight
5952 to 6945 pounds
Overview
 | 2018 -
4E SeriesUtility tractor |
|---|---|
2018 - | |
4E Series | |
Utility tractor | |
Production | |
|---|---|
Manufacturer | Deutz-Fahr |
Utility tractor | |
Deutz-Fahr 4085E Engine | |
|---|---|
SDF 3.0L 3-cyl diesel | |
Fuel tank | 18.5 gal
70.0 L |
Engine details ...  | |
Deutz-Fahr 4085E Transmission | |
|---|---|
30-speed partially synchronized | |
Transmission details ...  |
Deutz-Fahr 4085E Power | |
|---|---|
Engine | 80.9 hp
60.3 kW |
Mechanical | |
|---|---|
Two- or four-wheel drive | |
Differential lock | mechanical |
Power steering | |
Wet disc brakes | |
Open operator station. Cab optional with air-conditioning. | |
Hydraulics | |
|---|---|
Type | open center |
Valves | 2 |
Pump flow | 11.1 gpm
42.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | II |
Rear lift | 7717 lbs
3500 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E |
Dimensions & Tires | |
|---|---|
2WD Wheelbase | 80.4 inches
204 cm |
4WD Wheelbase | 77.8 inches
197 cm |
Weight | 5952 to 6945 pounds |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
References | |
|---|---|
 | |
4050E - 4065E - 4075E - 485E - 4080.4E - 4090.4E - 4100.4E published in 2019, by Deutz-Fahr |
Engine
Engine Detail — 183.1 ci / 3.0 L Diesel
Manufacturer | SDF 1000.3 WTI |
Configuration | turbocharged intercooled diesel, 3-cylinder, liquid-cooled |
Displacement | 183.1 ci
3.0 L |
Bore/Stroke | 4.13x4.56 inches
105 x 116 mm |
Emissions | Stage IIIA |
Power | 80.9 hp
60.3 kW |
Torque | 234.5 lb-ft
318.0 Nm |
Starter | electric |
Starter volts | 12 |
Transmission
Transmission — 30 forward and 15 reverse partially synchronized
Type | partially synchronized |
Gears | 30 forward and 15 reverse |
Five synchronized gears in three ranges with shuttle and underdrive. | |
Dimensions
Deutz-Fahr 4085E Tires |
|---|
Dimensions | |
|---|---|
2WD Wheelbase | 80.4 inches
204 cm |
4WD Wheelbase | 77.8 inches
197 cm |
Width | 69.8 inches
177 cm |
Deutz-Fahr 4085E Weight | |
|---|---|
2WD Open | 5952 lbs
2699 kg |
4WD Open | 6614 lbs
3000 kg |
2WD Cab | 6283 lbs
2849 kg |
4WD Cab | 6945 lbs
3150 kg |
2WD Max capacity | 8378 lbs
3800 kg |
4WD Max capacity | 10582 lbs
4799 kg |
Photos
Deutz-Fahr 4085E tractor photo
Recommended Implements & Sizing Guide
Engineering recommendations for Deutz Fahr Deutz-Fahr 4085E based on its 80.9 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 3 to 4 Bottom (16")3 - 4 铧 (40 cm) | Heavy Duty | Suitable for medium loam and stubble turnover. |
Rotary Cutter / MowerMowing & Clearing | 7 to 8 ft (84-96 in)2.1 - 2.4 m | Heavy Duty | Heavy-duty twin spindle cutter for overgrown acreage. |
Rotary TillerSeedbed Prep | 78 to 84 in200 - 215 cm | Heavy Duty | Heavy commercial tiller with multi-speed gearbox. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 4x4 to 4x5 Round Baler1.2x1.5 m 紧凑圆捆机 | Heavy Duty | Silage and dry hay; 540 RPM PTO with slip-clutch. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Deutz Fahr Deutz-Fahr 4085E.
Estimated Continuous Field Runtime: 4.4 hrs
Approximately 4.4 hours of continuous field operation at ~75% rated power on a full tank (18.5 gal / 70 L).
Estimated 75% Load Fuel Burn~4.2 gal/hr (15.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Deutz Fahr Deutz-Fahr 4085E Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Deutz Fahr Deutz-Fahr 4085E.
Converted Equivalents:
Horsepower (HP)80.9 hp
Kilowatts (kW)60.3 kW
Metric Horsepower (PS / CV)82 PS
Direct Competitor Comparison
Compare Deutz-Fahr 4085E against same-era industry alternatives in the same horsepower class.
Current Model
Deutz Fahr
Deutz-Fahr 4085E
Engine Power:Diesel (listed): 80.9 hp / 60.3 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 734
Engine Power:73
Production Years:1972 - 1974
Related models
Deutz-Fahr 4.07
- Power:
- 65
- Production years:
- 1991 - 1995
Deutz-Fahr DX 3.60
- Power:
- 65
- Production years:
- 1986 - 1995
Deutz-Fahr D 6807
- Power:
- 67
- Production years:
- 1980 - 1982
Deutz-Fahr 4.70
- Power:
- 68
- Production years:
- 1995 - 1997
Deutz-Fahr DX 4.10
- Power:
- 68.4
- Production years:
- 1985 - 1988