Fendt Favorit 12S

The Fendt Favorit 12S is a tractor produced by Fendt. It is equipped with a 380.4 ci 6.2 L engine. The listed engine power is Diesel (listed): 110 hp / 82.0 kW. Transmission: 20 forward and 10 reverse. Operating weight: 9702 lbs 4400 kg.

Engine Power

Diesel (listed): 110 hp / 82.0 kW

Fuel & Capacities

34.3 gal 129.8 L

Transmission

20 forward and 10 reverse

Operating Weight

9702 lbs 4400 kg

Overview

	1970 - 1972

Production
Manufacturer	Fendt
Built in Marktoberdorf, Germany

Fendt Favorit 12S Engine
MWM 6.2L 6-cyl diesel
Fuel tank	34.3 gal 129.8 L
Engine details ...

Fendt Favorit 12S Power
Engine	110 hp 82.0 kW

Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Open operator station.

Tractor hitch
Rear lift	9150 lbs 4150 kg

Power Take-off (PTO)
Rear PTO Type	540/1000

Dimensions & Tires
Wheelbase	102.8 inches 261 cm
Weight	9702 lbs 4400 kg
Front tire	11.2-28
Rear tire	18.4-34
Full dimensions and tires ...

Engine

Engine Detail — 380.4 ci / 6.2 L Diesel

Manufacturer	MWM D226
Fuel Type	Diesel
Configuration	6-cylinder, liquid-cooled
Displacement	380.4 ci 6.2 L
Bore/Stroke	4.13x4.72 inches 105 x 120 mm
Power	110 hp 82.0 kW
Rated RPM	2400

Transmission

Transmission options
16-speed
20-speed creeper

Transmission — 16 forward and 8 reverse

Gears	16 forward and 8 reverse
Transmission
Type	creeper
Gears	20 forward and 10 reverse

Dimensions

Fendt Favorit 12S Tires
Ag front	11.2-28
Ag rear	18.4-34

Dimensions
Wheelbase	102.8 inches 261 cm
Length	173.2 inches 439 cm
Height	98.4 inches 249 cm
Weight	9702 lbs 4400 kg

Photos

Fendt Favorit 12S tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Favorit 12S based on its 110 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Favorit 12S.

Estimated Continuous Field Runtime: 6 hrs

Approximately 6 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).

Estimated 75% Load Fuel Burn~5.7 gal/hr (21.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours