Fendt Favorit 611LS

The Fendt Favorit 611LS is a tractor produced by Fendt. It is equipped with a 380.8 ci 6.2 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 16 forward and 7 reverse. Operating weight: 11,653 lbs (2WD) 5285 kg.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Fuel & Capacities

58.7 gal 222.2 L

Transmission

16 forward and 7 reverse

Operating Weight

11,653 lbs (2WD) 5285 kg

Overview

	1979 - 1993 Model year 1979-19841984-1993 Favorit 600 SeriesRow-Crop tractor Favorit 600 Series Row-Crop tractor

Production
Manufacturer	Fendt
Row-Crop tractor

Fendt Favorit 611LS Engine
MWM 6.2L 6-cyl diesel
Fuel tank	58.7 gal 222.2 L
Engine details ...

Fendt Favorit 611LS Transmission
16-speed
Transmission details ...

Fendt Favorit 611LS Power
Engine	105 hp 78.3 kW

Mechanical
Two- or four-wheel drive
Power steering

Hydraulics
Pump flow	11.9 gpm 45.0 lpm

Tractor hitch
Rear lift	12789 lbs 5801 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	107.09 inches 272 cm
Weight	11653 to 12348 pounds
Front tire	11.00-16
Rear tire	18.4R38
Full dimensions and tires ...

Engine

Engine Detail — 380.8 ci / 6.2 L Diesel

Manufacturer	MWM D226-6
Fuel Type	Diesel
Configuration	6-cylinder
Displacement	380.8 ci 6.2 L
Bore/Stroke	4.1338x4.72 inches 105 x 120 mm
Power	105 hp 78.3 kW
Rated RPM	2350
Torque	274.4 lb-ft 372.1 Nm
Torque RPM	1500

Transmission

Transmission — 16 forward and 7 reverse

Gears

16 forward and 7 reverse

Dimensions

Fendt Favorit 611LS Tires
Ag front	11.00-16
	14.9-26 (4WD)
Ag rear	18.4R38

Dimensions
Wheelbase	107.09 inches 272 cm
Length	188.98 inches 480 cm
Height	112.60 inches 286 cm
Weight	11,653 lbs (2WD) 5285 kg
	12,348 lbs (4WD) 5601 kg

Photos

Fendt Favorit 611LS

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Favorit 611LS based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Favorit 611LS.

Estimated Continuous Field Runtime: 10.8 hrs

Approximately 10.8 hours of continuous field operation at ~75% rated power on a full tank (58.7 gal / 222.2 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours