Fendt Favorit 611S

The Fendt Favorit 611S is a tractor produced by Fendt. It is equipped with a 380.8 ci 6.2 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: 16 forward and 7 reverse. Operating weight: 9018 to 10054 pounds.

Engine Power

Diesel (listed): 105 hp / 78.3 kW

Fuel & Capacities

34.3 gal 129.8 L

Transmission

16 forward and 7 reverse

Operating Weight

9018 to 10054 pounds

Overview

	1972 - 1976 Favorit 600 Series

Production
Manufacturer	Fendt
Built in Marktoberdorf, Germany

Fendt Favorit 611S Engine
MWM 6.2L 6-cyl diesel
Fuel tank	34.3 gal 129.8 L
Engine details ...

Fendt Favorit 611S Transmission
16-speed
Transmission details ...

Fendt Favorit 611S Power
Engine	105 hp 78.3 kW

Mechanical
Two- or four-wheel drive

Tractor hitch
Rear lift	7938 lbs 3600 kg

Power Take-off (PTO)
Rear PTO Type	540, 1000

Dimensions & Tires
Wheelbase	105.91 inches 269 cm
Weight	9018 to 10054 pounds
Front tire	7.50-20
Rear tire	18.4-34
Full dimensions and tires ...

Engine

Engine Detail — 380.8 ci / 6.2 L Diesel

Manufacturer	MWM D226-6
Fuel Type	Diesel
Configuration	6-cylinder
Displacement	380.8 ci 6.2 L
Bore/Stroke	4.13x4.72 inches 105 x 120 mm
Power	105 hp 78.3 kW
Rated RPM	2350
Starter type	electric

Transmission

Transmission — 16 forward and 7 reverse

Gears

16 forward and 7 reverse

Dimensions

Fendt Favorit 611S Tires
Ag front	7.50-20
	11.2-28 (4WD)
Ag rear	18.4-34

Dimensions
Wheelbase	105.91 inches 269 cm
Length	173.23 inches 440 cm
Height	103.94 inches 264 cm
2WD Weight	9,018 lbs 4090 kg
4WD Weight	10,054 lbs 4560 kg

Photos

Fendt Favorit 611S

Recommended Implements & Sizing Guide

Engineering recommendations for Fendt Favorit 611S based on its 105 HP power envelope and ASAE agricultural standards.

Implement & Operation	Recommended Size	Workload Rating	Engineering Notes
Moldboard PlowPrimary Tillage	4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm)	Heavy Duty	Heavy primary tillage; semi-mounted hitch recommended.
Rotary Cutter / MowerMowing & Clearing	10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼	Heavy Duty	Wide swath pasture and crop residue shredding.
Rotary TillerSeedbed Prep	90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机	Commercial / Field Scale	Deep intensive seedbed preparation for commercial row crops.
Disc HarrowSecondary Tillage	10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙	Heavy Duty	Aggressive residue cutting in corn/cotton stubble.
Hay BalerHay & Forage	5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机	Heavy Duty	High density baling; requires minimum 85 PTO HP.

Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Fendt Favorit 611S.

Estimated Continuous Field Runtime: 6.3 hrs

Approximately 6.3 hours of continuous field operation at ~75% rated power on a full tank (34.3 gal / 129.8 L).

Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)

Standard Spec: API CK-4 / CJ-4 Heavy Duty

Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)

Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)

Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix

Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze

Service Interval: 2 Years / 1500 Hours