Ford GT-95

The Ford GT-95 is a tractor produced by Ford Lawn Tractors. It is equipped with a 770 cc 46.98 ci engine. The listed engine power is Gasoline (gross): 20 hp / 14.9 kW. Transmission: infinite forward and reverse (2-range). Operating weight: 1050 lbs 476 kg.

Engine Power
Gasoline (gross): 20 hp / 14.9 kW
Fuel & Capacities
4.2 gal 15.9 L
Transmission
infinite forward and reverse (2-range)
Operating Weight
1050 lbs 476 kg

Overview

Ford GT-95 tractor photo
1992 - 1997 GT SeriesGarden tractorShibaura built GT Series Garden tractor Shibaura built
Production
Distributor
Ford
Manufacturer
Shibaura
Garden tractor
Ford GT-95 Engine
20HP Kohler 770cc 2-cyl gasoline
Fuel tank
4.2 gal 15.9 L
Engine details ...
Ford GT-95 Transmission
hydrostatic
Transmission details ...
Mechanical
Two-wheel drive
Steering
manual
Steering
power OptOptional
Disc brakes
Open operator station.
Tractor hitch
Rear Type
0 OptOptional
Power Take-off (PTO)
Rear PTO
optional
Mid PTO
independent
Clutch
manual idler pulley
Front PTO
independent
Clutch
manual idler pulley
Dimensions & Tires
Wheelbase
49.8 inches 126 cm
Weight
1050 lbs 476 kg
Front tire
16x6.50-8
Rear tire
23x10.50-12
Full dimensions and tires ...
Electrical
Ground
negative
Charging system
alternator
Battery CCA
390
Battery volts
12
References
GT-95 references literature
Lawn & Garden Tractors published in 1991, by Ford
Lawn & Garden Tractors published in 1995, by Ford
Service Manual GT Series (40006540) published in 1994

Engine

Engine Detail — 770 cc / 46.98 ci Gasoline

Manufacturer
Kohler M20
Fuel Type
Gasoline
Configuration
2-cylinder, air-cooled horizontal-shaft V-Twin
Displacement
770 cc 46.98 ci
Bore/Stroke
3.12x3.06 inches 79 x 78 mm
Power (gross)
20 hp 14.9 kW
Air cleaner
dry
Starter volts
12
Oil capacity
2.9 qts 2.7 L

Transmission

Transmission — infinite forward and reverse (2-range) shaft-driven hydrostatic

Type
shaft-driven hydrostatic
Gears
infinite forward and reverse (2-range)
Oil capacity
9.1 qts 8.6 L
10.1 qts*Capacity with power steering. 9.6 L
GT-95  shaft-driven hydrostatic speeds

Dimensions

Ford GT-95 Tires
Lawn/turf front
16x6.50-8
Lawn/turf rear
23x10.50-12
Dimensions
Wheelbase
49.8 inches 126 cm
Length
74.5 inches 189 cm
Width
39 inches 99 cm
Height (steering wheel)
45 inches 114 cm
Shipping weight
1050 lbs 476 kg
Ground clearance
6.2 inches 15 cm

Attachments

Attachment overview
44" mid-mount mower deck
48" mid-mount mower deck
60" mid-mount mower deck
Snowblower
Blade
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.

Photos

Ford GT-95

Ford GT-95

Recommended Implements & Sizing Guide

Engineering recommendations for Ford Lawn Tractors Ford GT-95 based on its 20 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ford Lawn Tractors Ford GT-95.

Estimated Continuous Field Runtime: 4 hrs

Approximately 4 hours of continuous field operation at ~75% rated power on a full tank (4.2 gal / 15.9 L).

Estimated 75% Load Fuel Burn~1 gal/hr (3.9 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Ford Lawn Tractors Ford GT-95 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford Lawn Tractors Ford GT-95.

Converted Equivalents:

Horsepower (HP)20 hp
Kilowatts (kW)14.9 kW
Metric Horsepower (PS / CV)20.3 PS

Direct Competitor Comparison

Compare Ford GT-95 against same-era industry alternatives in the same horsepower class.

Current Model
Ford Lawn Tractors

Ford GT-95

Engine Power:Gasoline (gross): 20 hp / 14.9 kW
★ Baseline Reference
Massey FergusonMarket Competitor

Massey Ferguson 1215

Engine Power:18
Production Years:1996 - 2003
International HarvesterMarket Competitor

International Harvester 184 Lo-Boy

Engine Power:18
Production Years:1977 - 1980
CaseIHMarket Competitor

CaseIH 235

Engine Power:18
Production Years:1986 - 1990
KubotaMarket Competitor

Kubota B7410

Engine Power:18
Production Years:2004 - 2007