Scotts GT2554
The Scotts GT2554 is a tractor produced by Scotts Lawn Tractors. It is equipped with a 721 cc 44.0 ci engine. The listed engine power is Gasoline (listed): 25 hp / 18.6 kW. Transmission: Tuff Torq K66C. Operating weight: 606 lbs 274 kg.
Engine Power
Gasoline (listed): 25 hp / 18.6 kW
Fuel & Capacities
3 gal
11.4 L
Transmission
Tuff Torq K66C
Operating Weight
606 lbs
274 kg
Overview
 | 2002
Garden tractorJohn Deere built
Garden tractor
John Deere built |
|---|
Production | |
|---|---|
Distributor | Scotts |
Manufacturer | John Deere |
Garden tractor | |
Built in Greeneville, Tennessee, USA | |
Scotts GT2554 Engine | |
|---|---|
25HP Kohler 721cc 2-cyl gasoline | |
Fuel tank | 3 gal
11.4 L |
Engine details ...  | |
Scotts GT2554 Transmission | |
|---|---|
hydrostatic | |
Transmission details ...  |
Mechanical | |
|---|---|
Two-wheel drive | |
Manual steering | |
Open operator station. |
Tractor hitch | |
|---|---|
Type | sleeve hitch OptOptional |
Power Take-off (PTO) | |
|---|---|
Mid PTO | independent |
Clutch | electric |
Mid PTO Type | pulley |
Dimensions & Tires | |
|---|---|
Weight | 606 to 825 pounds |
Front tire | 16x7.50-8 |
Rear tire | 24x12.00-12 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | negative |
Battery volts | 12 |
Engine
Engine Detail — 721 cc / 44.0 ci Gasoline
Manufacturer | Kohler CV25S |
Fuel Type | Gasoline |
Configuration | 2-cylinder, air-cooled vertical-shaft V-Twin |
Displacement | 721 cc
44.0 ci |
Power | 25 hp
18.6 kW |
Air cleaner | dual stage |
Starter type | electric |
Sparkplug gap | 0.030 inches
0.762 mm |
Oil capacity | 2.2 qts
2.1 L |
Scotts GT2554 Engine | |
|---|---|
 | |
Image courtesy of John Chaffin |
Transmission
Transmission — Tuff Torq K66C
Transmission | Tuff Torq K66C |
Type | belt-driven hydrostatic |
Gears | infinite forward and reverse |
 | |
Dimensions
Scotts GT2554 Tires | |
|---|---|
Lawn/turf front | 16x7.50-8 |
Lawn/turf rear | 24x12.00-12 |
Dimensions | |
|---|---|
Length | 72.3 inches
183 cm |
Height | 45.6 inches
115 cm |
Weight | 606 lbs
274 kg |
Shipping weight | 825 lbs
374 kg |
Attachments
Attachment overview | |
|---|---|
54" mid-mount mower deck | |
Snowblower | |
Blade | |
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments. |
54" Mower deck | |
|---|---|
Type | mid-mount Scotts |
3-blade | |
Cutting width | 54 inches
137 cm |
Cut height | 1 to 4 inch
2 to 10 cm |
Cut positions | 7 |
Photos
Scotts GT2554 garden tractor.
Scotts GT2554 operator station and controls.
Scotts GT2554 garden tractor.
Recommended Implements & Sizing Guide
Engineering recommendations for Scotts Lawn Tractors Scotts GT2554 based on its 25 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 1 to 2 Bottom (12")1 - 2 铧 (30 cm) | Light Duty | Ideal for garden plots and light sandy soil. |
Rotary Cutter / MowerMowing & Clearing | 5 ft (60 in)1.5 m | Medium Duty | Pasture maintenance and weeds up to 1.5" diameter. |
Rotary TillerSeedbed Prep | 54 to 60 in135 - 150 cm | Medium Duty | Thorough seedbed preparation in orchards and vegetable plots. |
Disc HarrowSecondary Tillage | 5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片) | Light Duty | Small acreage soil break-up and secondary aeration. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Scotts Lawn Tractors Scotts GT2554.
Estimated Continuous Field Runtime: 2.3 hrs
Approximately 2.3 hours of continuous field operation at ~75% rated power on a full tank (3 gal / 11.4 L).
Estimated 75% Load Fuel Burn~1.3 gal/hr (4.9 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Scotts Lawn Tractors Scotts GT2554 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Scotts Lawn Tractors Scotts GT2554.
Converted Equivalents:
Horsepower (HP)25 hp
Kilowatts (kW)18.6 kW
Metric Horsepower (PS / CV)25.3 PS
Direct Competitor Comparison
Compare Scotts GT2554 against same-era industry alternatives in the same horsepower class.
Current Model
Scotts Lawn Tractors
Scotts GT2554
Engine Power:Gasoline (listed): 25 hp / 18.6 kW
★ Baseline Reference
Related models
Scotts lawn tractors 50567X
- Power:
- 20
- Production years:
- 1998 - 1998
Scotts lawn tractors L2048
- Power:
- 20
- Production years:
- 2002 - 2002
Scotts lawn tractors S2046
- Power:
- 20
- Production years:
- 1999 - 2001
Scotts lawn tractors S2048
- Power:
- 20
- Production years:
- 1999 - 2001
Scotts lawn tractors S2348
- Power:
- 23
- Production years:
- 2000 - 2001