Wagner TR-6
The Wagner TR-6 is a tractor produced by Wagner. It is equipped with a 401 ci 6.6 L engine. The listed engine power is Diesel (listed): 105 hp / 78.3 kW. Transmission: Fuller R-46. Operating weight: 12700 lbs 5760 kg.
Engine Power
Diesel (listed): 105 hp / 78.3 kW
Fuel & Capacities
56 gal
212.0 L
Transmission
Fuller R-46
Operating Weight
12700 lbs
5760 kg
Overview
 | 1955 - 1960
WA SeriesFour-wheel Drive (4WD) tractor
WA Series
Four-wheel Drive (4WD) tractor |
|---|
Production | |
|---|---|
Manufacturer | Wagner |
Four-wheel Drive (4WD) tractor | |
Built in Portland, Oregon, USA | |
Wagner TR-6 Engine | |
|---|---|
Cummins 6.6L 6-cyl diesel | |
Engine details ...  |
Wagner TR-6 Transmission | |
|---|---|
8-speed | |
Transmission details ...  |
Wagner TR-6 Power | |
|---|---|
Engine | 105 hp
78.3 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Final drives | planetary |
Steering | hydraulic power |
Hydraulic brakes | |
Open operator station. Cab optional. | |
Capacity | |
|---|---|
Fuel | 56 gal
212.0 L |
Hydraulic system | 30 gal
113.6 L |
Hydraulics | |
|---|---|
Capacity | 30 gal
113.6 L |
Pump flow | 11 gpm
41.6 lpm |
Steering flow | 11 gpm
41.6 lpm |
Dimensions & Tires | |
|---|---|
Wheelbase | 105 inches
266 cm |
Weight | 12700 lbs
5760 kg |
Front tire | 13.00x26 |
Rear tire | 13.00x26 |
Full dimensions and tires ...  | |
Engine
Engine Detail — 401 ci / 6.6 L Diesel
Manufacturer | Cummins JF-6 |
Fuel Type | Diesel |
Configuration | 6-cylinder, liquid-cooled |
Displacement | 401 ci
6.6 L |
Bore/Stroke | 4.125x5.00 inches
105 x 127 mm |
Power | 105 hp
78.3 kW |
Rated RPM | 2200 |
Torque | 280 lb-ft
379.7 Nm |
Torque RPM | 1600 |
Starter | electric |
Starter volts | 12 |
Coolant capacity | 30 qts
28.4 L |
Transmission
Transmission — Fuller R-46
Transmission | Fuller R-46 |
Gears | 8 forward and 2 reverse |
Dimensions
Wagner TR-6 Tires | |
|---|---|
Standard tires (ag) | Front: 13.00x26. Rear: 13.00x26 |
Dimensions | |
|---|---|
Wheelbase | 105 inches
266 cm |
Length | 190 inches
482 cm |
Width | 81 inches
205 cm |
Height | 80 inches
203 cm |
Height (cab) | 103 inches
261 cm |
Weight | 12700 lbs
5760 kg |
Ground clearance | 16 inches
40 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Wagner TR-6 based on its 105 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Wagner TR-6.
Estimated Continuous Field Runtime: 10.3 hrs
Approximately 10.3 hours of continuous field operation at ~75% rated power on a full tank (56 gal / 212 L).
Estimated 75% Load Fuel Burn~5.5 gal/hr (20.7 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Wagner TR-6 Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Wagner TR-6.
Converted Equivalents:
Horsepower (HP)105 hp
Kilowatts (kW)78.3 kW
Metric Horsepower (PS / CV)106.5 PS
Direct Competitor Comparison
Compare Wagner TR-6 against same-era industry alternatives in the same horsepower class.
Current Model
Wagner
Wagner TR-6
Engine Power:Diesel (listed): 105 hp / 78.3 kW
★ Baseline Reference
Related models
Wagner WA-4
- Power:
- 102
- Production years:
- 1961 - 1969
Wagner TR-9
- Power:
- 120
- Production years:
- 1955 - 1960
Wagner WA-14
- Power:
- 220
- Production years:
- 1961 - 1969
Wagner WA-17
- Power:
- 250
- Production years:
- 1961 - 1969
Wagner WA-9
- Power:
- 160
- Production years:
- 1961 - 1969