Ford YT-16H

The Ford YT-16H is a tractor produced by Ford Lawn Tractors. It is equipped with a 655 cc 40 ci engine. The listed engine power is Gasoline (listed): 16 hp / 11.9 kW. Transmission: Eaton. Operating weight: 475 to 738 pounds.

Engine Power
Gasoline (listed): 16 hp / 11.9 kW
Fuel & Capacities
2.3 gal (early) 8.7 L
Transmission
Eaton
Operating Weight
475 to 738 pounds

Overview

Ford YT-16H tractor photo
1984 - 1993 Model year 1984-19891990-1993 YT SeriesGarden tractorGilson built YT Series Garden tractor Gilson built
Production
Distributor
Ford
Manufacturer
Gilson
Garden tractor
Variants
YT-16
5-speed
YT-16H
hydrostatic
Ford YT-16H Engine
16HP Briggs & Stratton 655cc 2-cyl gasoline
Fuel tank
2.3 gal (early) 8.7 L
4 gal (late) 15.1 L
Engine details ...
Ford YT-16H Transmission
hydrostatic
Transmission details ...
Mechanical
Two-wheel drive
Steering
manual sector-and-pinion
Mechanical caliper-engaged disc on transaxle brakes
Open operator station. Optional vinyl cab.
Power Take-off (PTO)
Mid PTO
independent
Clutch
electric
Dimensions & Tires
Wheelbase
49 inches 124 cm
Weight
475 to 738 pounds
Front tire
15x6.00-6
Rear tire
22.5x9.00-12
Full dimensions and tires ...
Electrical
Ground
negative
Charging amps
16
Battery CCA
220
Battery volts
12
References
YT-16H references literature
Lawn, Yard and Garden Equipment published in 1986, by Ford
Lawn, Yard and Garden Equipment published in 1987, by Ford
Lawn, Yard and Garden Tractors - Riding Mowers published in 1988, by Ford

Engine

Engine Detail — 655 cc / 40 ci Gasoline

Manufacturer
Briggs & Stratton 402707
Fuel Type
Gasoline
Configuration
2-cylinder, air-cooled
Displacement
655 cc 40 ci
Bore/Stroke
3.44x2.16 inches 87 x 55 mm
Power
16 hp 11.9 kW
Air cleaner
dual element with precleaner
Rated RPM
3600
Starter volts
12
Oil capacity
1.5 qts 1.4 L

Transmission

Transmission — Eaton

Transmission
Eaton
Type
belt-driven hydrostatic
Gears
infinite forward and reverse
Oil capacity
1.15 qts 1.1 L
Eaton 700 used until 1989. Eaton 850 used from 1989 to 1991.
YT-16H  belt-driven hydrostatic speeds

Dimensions

Ford YT-16H Tires
Lawn/turf front
15x6.00-6
Lawn/turf rear
22.5x9.00-12
Dimensions
Wheelbase
49 inches 124 cm
Length
73 inches 185 cm
Width
36 inches 91 cm
Height (steering wheel)
39 inches 99 cm
Shipping weight
475 lbs 215 kg
738 lbs (with 42-inch mower) 334 kg
Ground clearance
7 inches (transmission) 17 cm
Clearance (front axle)
10 inches 25 cm

Attachments

Attachment overview
42" mid-mount mower deck
48" mid-mount mower deck
Snowblower
Blade
Attachments for the YT-16H included a 26-inch rear-mounted tiller with 12-inch time and a 5-inch tilling depth. Two trailer-type lawn sweepers (31 and 38 inch) were available, as were and two dump carts. One was 6-cubic-feet with a 500-pound capacity, the other was 10-cubic-feet with an 800-pound capacity.

Photos

Ford YT-16H

Ford YT-16H

Recommended Implements & Sizing Guide

Engineering recommendations for Ford Lawn Tractors Ford YT-16H based on its 16 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
4 ft (48 in)1.2 mLight DutyPasture clipping and light brush under 1" diameter.
Rotary TillerSeedbed Prep
42 to 48 in105 - 120 cmLight DutyCovers compact tractor tire width.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Ford Lawn Tractors Ford YT-16H.

Estimated Continuous Field Runtime: 2.8 hrs

Approximately 2.8 hours of continuous field operation at ~75% rated power on a full tank (2.3 gal / 8.7 L).

Estimated 75% Load Fuel Burn~0.8 gal/hr (3.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Ford Lawn Tractors Ford YT-16H Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Ford Lawn Tractors Ford YT-16H.

Converted Equivalents:

Horsepower (HP)16 hp
Kilowatts (kW)11.9 kW
Metric Horsepower (PS / CV)16.2 PS

Direct Competitor Comparison

Compare Ford YT-16H against same-era industry alternatives in the same horsepower class.

Current Model
Ford Lawn Tractors

Ford YT-16H

Engine Power:Gasoline (listed): 16 hp / 11.9 kW
★ Baseline Reference
KubotaMarket Competitor

Kubota JB14

Engine Power:14.4
Production Years:2006 - 2008
DeereMarket Competitor

Deere LA

Engine Power:14.4
Production Years:1941 - 1946
FordMarket Competitor

Ford 1120

Engine Power:14.7
Production Years:1987 - 1993
New HollandMarket Competitor

New Holland 1120

Engine Power:14.7
Production Years:1987 - 1993