Iseki TH265

The Iseki TH265 is a tractor produced by Iseki. It is equipped with a 91.4 ci 1.5 L engine. The listed engine power is Diesel (listed): 26.1 hp / 19.5 kW. Transmission: 24 forward and reverse. Operating weight: 1984 to 3296 pounds.

Engine Power
Diesel (listed): 26.1 hp / 19.5 kW
Fuel & Capacities
6.6 gal 25.0 L
Transmission
24 forward and reverse
Operating Weight
1984 to 3296 pounds

Overview

Iseki TH265 tractor photo
2010 - 2016 TH5 SeriesCompact Utility tractor TH5 Series Compact Utility tractor
Production
Manufacturer
Iseki
Compact Utility tractor
Iseki TH265 Engine
Iseki 1.5L 3-cyl diesel
Fuel tank
6.6 gal 25.0 L
Engine details ...
Iseki TH265 Power
Engine
26.1 hp 19.5 kW
Mechanical
Four-wheel drive
Power steering
Wet disc brakes
Two-post folding ROPS. Cab optional with air-conditioning.
Tractor hitch
Rear Type
JIS0
Power Take-off (PTO)
Rear PTO Type
540 (1.375)
Engine RPM
523@2500
783@2500
1184@2500
Dimensions & Tires
Weight
1984 to 3296 pounds
Front tire
7-14
Rear tire
9.5-24
Full dimensions and tires ...
Electrical
Ground
negative
Battery volts
12
Battery AH
55
References
TH265 references literature
TH5 Series - Stylish Field Work published in 2016, by Iseki
Operator's Manual TH5 Series (1765-912-011-0) published in 2016

Engine

Engine Detail — 91.4 ci / 1.5 L Diesel

Manufacturer
Iseki E3CD
Fuel Type
Diesel
Configuration
3-cylinder, liquid-cooled
Displacement
91.4 ci 1.5 L
Bore/Stroke
3.43x3.31 inches 87 x 84 mm
Power
26.1 hp 19.5 kW
Rated RPM
2500
Starter
electric
Starter volts
12

Transmission

Transmission options
12-speed gear
24-speed partial power shift

Transmission — 12 forward and reverse gear

Type
gear
Gears
12 forward and reverse
Clutch
dry disc
Four gears in three ranges with mechanical shuttle.
TH265  gear speeds

Transmission — 24 forward and reverse partial power shift

Type
partial power shift
Gears
24 forward and reverse
Eight power shift gears in three ranges with power shuttle.
TH265  partial power shift speeds

Dimensions

Iseki TH265 Tires
Standard tires (ag)
Front: 7-14. Rear: 9.5-24
Dimensions
ROPS Length
106.3 inches 270 cm
Cab Length
108.3 inches 275 cm
Crawler Length
113.8 inches 289 cm
ROPS Width
46.5 inches 118 cm
Cab Width
49 inches 124 cm
Crawler Width
56.3 inches 143 cm
Height (ROPS)
78.4 inches 199 cm
Height (cab)
78.4 inches 199 cm
Ground clearance
13.4 inches 34 cm
Front tread
37.8 inches 96 cm
Rear tread
34.7/40.8 inches 88/103 cm
Iseki TH265 Weight
ROPS
1984 lbs 899 kg
Cab
2403 lbs 1090 kg
Crawler
3296 lbs 1495 kg

Photos

Iseki TH265 tractor photo

Iseki TH265 tractor photo

Recommended Implements & Sizing Guide

Engineering recommendations for Iseki TH265 based on its 26.1 HP power envelope and ASAE agricultural standards.

Implement & OperationRecommended SizeWorkload RatingEngineering Notes
Moldboard PlowPrimary Tillage
1 to 2 Bottom (12")1 - 2 铧 (30 cm)Light DutyIdeal for garden plots and light sandy soil.
Rotary Cutter / MowerMowing & Clearing
5 ft (60 in)1.5 mMedium DutyPasture maintenance and weeds up to 1.5" diameter.
Rotary TillerSeedbed Prep
54 to 60 in135 - 150 cmMedium DutyThorough seedbed preparation in orchards and vegetable plots.
Disc HarrowSecondary Tillage
5 to 6 ft (16-18" discs)1.5 - 1.8 m (40-45 cm 耙片)Light DutySmall acreage soil break-up and secondary aeration.
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.

Fluids, Capacities & Working Autonomy

Standard fluid requirements, service intervals, and continuous runtime estimates for Iseki TH265.

Estimated Continuous Field Runtime: 4.9 hrs

Approximately 4.9 hours of continuous field operation at ~75% rated power on a full tank (6.6 gal / 25 L).

Estimated 75% Load Fuel Burn~1.4 gal/hr (5.1 L/hr)

Engine Crankcase Oil

SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours

Transmission & Hydraulic System

UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours

Engine Cooling System

50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours

Iseki TH265 Specification Unit Converter

Convert power, fluid capacities, and operating weights between metric and imperial standards for Iseki TH265.

Converted Equivalents:

Horsepower (HP)26.1 hp
Kilowatts (kW)19.5 kW
Metric Horsepower (PS / CV)26.5 PS

Direct Competitor Comparison

Compare Iseki TH265 against same-era industry alternatives in the same horsepower class.

Current Model
Iseki

Iseki TH265

Engine Power:Diesel (listed): 26.1 hp / 19.5 kW
★ Baseline Reference
DeereMarket Competitor

Deere 1023E

Engine Power:23.5
Production Years:2011 - 2026
KubotaMarket Competitor

Kubota L235

Engine Power:23.5
Production Years:1981 - 1985
Zetor ZebraMarket Competitor

Zetor Zebra 2040

Engine Power:23.5
FarmallMarket Competitor

Farmall C

Engine Power:23.5
Production Years:1948 - 1951