Steyr 4110 Profi
The Steyr 4110 Profi is a tractor produced by Steyr. It is equipped with a 273.7 ci 4.5 L engine. The listed engine power is Diesel (gross): 112 hp / 83.5 kW. Transmission: Power-8 Creeper. Operating weight: 10626 lbs 4819 kg.
Engine Power
Diesel (gross): 112 hp / 83.5 kW
Fuel & Capacities
46.5 gal
176.0 L
Transmission
Power-8 Creeper
Operating Weight
10626 lbs
4819 kg
Overview
 | 2007 - 2015
Model year 2007-20122012-2015
Utility tractor |
|---|
Production | |
|---|---|
Manufacturer | Steyr |
Utility tractor | |
Steyr 4110 Profi Engine | |
|---|---|
Iveco 4.5L 4-cyl diesel | |
Fuel tank | 46.5 gal
176.0 L |
Engine details ...  | |
Steyr 4110 Profi Power | |
|---|---|
Engine (gross) | 112 hp
83.5 kW |
Engine (max) | 142 hp
105.9 kW |
Mechanical | |
|---|---|
Four-wheel drive | |
Power steering | |
Hydraulic wet disc brakes | |
Trailer brakes | pneumatic OptOptional |
hydraulic OptOptional | |
Steyr SK3 cab standard with air-conditioning. | |
Hydraulics | |
|---|---|
Type | closed center load sensing |
Valves | 4 (max) |
Pump flow | 29.85 gpm
113.0 lpm |
Tractor hitch | |
|---|---|
Rear Type | III/II |
Rear lift | 13708 lbs
6217 kg |
Front lift | 8157 lbs
3700 kg |
Power Take-off (PTO) | |
|---|---|
Rear PTO | independent |
Rear PTO Type | 540/540E/1000 (1.375) |
Engine RPM | 540@1969 |
540E@1546 | |
1000@2120 | |
Front PTO | independent OptOptional |
Front PTO Type | 1000 |
Engine RPM | 1000@2120 |
Dimensions & Tires | |
|---|---|
Wheelbase | 95 inches
241 cm |
Weight | 10626 lbs
4819 kg |
Front tire | 14.9R24 |
Rear tire | 16.9R38 |
Full dimensions and tires ...  | |
Electrical | |
|---|---|
Ground | electric |
Charging system | alternator |
Engine
Engine Detail — 273.7 ci / 4.5 L Diesel
Manufacturer | Iveco |
Configuration | turbocharged intercooled diesel, 4-cylinder 16-valve, liquid-cooled |
Displacement | 273.7 ci
4.5 L |
Bore/Stroke | 4.09x5.20 inches
104 x 132 mm |
Rated Power (gross) | 112 hp
83.5 kW |
Maximum Power (gross) | 142 hp
105.9 kW |
Rated RPM | 2200 |
Torque | 383.5 lb-ft
520.0 Nm |
Torque RPM | 1400 |
Starter type | negative |
Transmission
Transmission options | |
|---|---|
16-speed four-speed power shift | |
32-speed |
Transmission — Power-8
Transmission | Power-8 |
Type | four-speed power shift |
Gears | 16 forward and reverse |
Transmission | Power-8 Creeper |
Gears | 32 forward and reverse |
Dimensions
Steyr 4110 Profi Tires | |
|---|---|
Ag front | 14.9R24 |
Ag rear | 16.9R38 |
Dimensions | |
|---|---|
Wheelbase | 95 inches
241 cm |
Length | 169 inches
429 cm |
Width | 73.75 inches
187 cm |
Height | 113.2 inches
287 cm |
Shipping weight | 10626 lbs
4819 kg |
Max weight | 19841 lbs
8999 kg |
Front tread | 55.4 to 83 inches
140 to 210 cm |
Rear tread | 56.3 to 79.9 inches
143 to 202 cm |
Recommended Implements & Sizing Guide
Engineering recommendations for Steyr 4110 Profi based on its 112 HP power envelope and ASAE agricultural standards.
| Implement & Operation | Recommended Size | Workload Rating | Engineering Notes |
|---|---|---|---|
Moldboard PlowPrimary Tillage | 4 to 5 Bottom (16-18")4 - 5 铧 (40-45 cm) | Heavy Duty | Heavy primary tillage; semi-mounted hitch recommended. |
Rotary Cutter / MowerMowing & Clearing | 10 to 12 ft Flex-Wing3.0 - 3.6 m 折叠双翼 | Heavy Duty | Wide swath pasture and crop residue shredding. |
Rotary TillerSeedbed Prep | 90 to 120 in Heavy Duty230 - 300 cm 重型旋耕机 | Commercial / Field Scale | Deep intensive seedbed preparation for commercial row crops. |
Disc HarrowSecondary Tillage | 10 to 14 ft Tandem / Offset3.0 - 4.2 m 重型交错耙 | Heavy Duty | Aggressive residue cutting in corn/cotton stubble. |
Hay BalerHay & Forage | 5x6 Round Baler or 3x3 Mid Square1.5x1.8 m 大圆捆或中型方捆机 | Heavy Duty | High density baling; requires minimum 85 PTO HP. |
Sizing & Soil Condition NoteActual implement sizing varies depending on local soil conditions (heavy clay vs sandy loam), field slope, and operating speed. Heavy tillage implements may require front ballast weights and wheel weights.
Fluids, Capacities & Working Autonomy
Standard fluid requirements, service intervals, and continuous runtime estimates for Steyr 4110 Profi.
Estimated Continuous Field Runtime: 8 hrs
Approximately 8 hours of continuous field operation at ~75% rated power on a full tank (46.5 gal / 176 L).
Estimated 75% Load Fuel Burn~5.8 gal/hr (22 L/hr)
Engine Crankcase Oil
SAE 15W-40 (Heavy Duty Diesel)
Standard Spec: API CK-4 / CJ-4 Heavy Duty
Service Interval: 150 – 250 Hours
Transmission & Hydraulic System
UTTO (Universal Tractor Transmission Oil)
Standard Spec: ISO VG 46 / 68 (Wet Brake & Trans Compatible)
Service Interval: 600 – 1000 Hours
Engine Cooling System
50/50 Ethylene Glycol Pre-mix
Standard Spec: ASTM D6210 / Heavy-Duty OAT Antifreeze
Service Interval: 2 Years / 1500 Hours
Steyr 4110 Profi Specification Unit Converter
Convert power, fluid capacities, and operating weights between metric and imperial standards for Steyr 4110 Profi.
Converted Equivalents:
Horsepower (HP)112 hp
Kilowatts (kW)83.5 kW
Metric Horsepower (PS / CV)113.6 PS
Direct Competitor Comparison
Compare Steyr 4110 Profi against same-era industry alternatives in the same horsepower class.
Current Model
Steyr
Steyr 4110 Profi
Engine Power:Diesel (gross): 112 hp / 83.5 kW
★ Baseline Reference
International HarvesterMarket Competitor
International Harvester 756
Engine Power:101
Production Years:1967 - 1971
Related models
Steyr 495
- Power:
- 90
- Production years:
- 2005 - 2008
Steyr 90
- Power:
- 90
- Production years:
- 1968 - 1974
Steyr 9095MT
- Power:
- 92.5
- Production years:
- 2008 - 2011
Steyr 9094
- Power:
- 94
- Production years:
- 1993 - 1995
Steyr M 9094
- Power:
- 94
- Production years:
- 1994 - 2003